Message: 29 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 59 Date: Wed, 01 Mar 2000 03:32:18 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: New question. By cobra_2_76@yahoo.com Re: Wheel size By enwilkin@mail.pittstate.edu Re: New question. By rebelmust@aol.com Re: New question. By tgrahl@iocenter.net Re: Hello By rscott@easy-pages.com Re: Hello By rscott@easy-pages.com T5 Headers By a351must@premier1.net RE: New question. By vbeauvais@home.com Wheel size By MotoX13@yahoo.com Re: T5 Headers By Cobraii976@aol.com Re: New question. By tims302@hotmail.com Decal kits By vbeauvais@home.com Re: Wheel size By tim-pam@williams-net.com ------------------------------------------------------------ Date: Tue, 29 Feb 2000 04:55:59 -0800 (PST) From: David Wilson Subject: Re: New question. I worked at a Ford Garage during High School and Mustang II years of 74 to 77 model years and remember the dealer prep mechanics drilling the antennia holes in the new cars. I suppose they may have had to drill them all, but am not sure. I still see the owner occasionally, and if I think of it, I'll ask him. As Phil said the antennia kits came with templates to locate them. I supposed it may have been a precaution in delivering the cars. --- PHIL L SCHMIDT wrote: > The original ford antenna kits include a template > for drilling locations of the factory antenna on the > fender.NOS ford fenders do not include a radio > antenna hole.Phil > Must II Spec Shop > ----- Original Message ----- > From: Timothy M. Grahl > To: mustangii@topica.com > Sent: Monday, February 28, 2000 1:10 PM > Subject: New question. > > > As you know, you could order a Mustang II without > a radio. That is where the radio delete plate comes > into play. Here is a point to ponder. > > If you ordered the car without a radio, you didn't > get an antenna either. There are no holes for the > antenna in the fender. Does that mean that there > were technically two different right hand fenders > put on the cars? I can't see putting in the holes > as the car goes down the assembly line so cars that > were radio delete may have had a different fender > put on. Any thoughts? > > > ===== Dave Wilson Cobra_2_76@yahoo.com My Cobra II, hosted by Dan Polk http://www.northpro.net/~polk/mii/ My home page is : http://www.geocities.com/MotorCity/Speedway/7500/index.html alt mail: Dwilson@ftmc.com __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com ------------------------------ Date: Tue, 29 Feb 2000 09:39:39 -0600 (CST) From: "Eric N. Wilkinson" Subject: Re: Wheel size II Fans, I went from 13s on the back to 14s and it made a tremendous difference. Now the only gear I have real trouble with traction in is first and the highway RPMs are down by 500. With my old 13s I was doing 3,000 RPM at 65mph which was not only irritating, but unnecesarry for a V8 and also ate up fuel at less than 14mpg. Now with 14s on the rear I do 2,500 RPM at 65mph and get a little over 17mpg - you know what the price of fuel is lately! Eric ------------------------------ Date: Tue, 29 Feb 2000 10:40:28 EST From: REBELMUST@aol.com Subject: Re: New question. yes there was a radio delete,it has a hole cover for the radio that is held in with 2 screws from behind I have one here,the car it came off had a plug in the hole for the antenna. after talking to assembly line persons I have been told that the fenders already had the hole for the antenna stamped in them before assembly line installation.It looked stock to me (the plug) and apeared to be orig. paint on the entire car.It also had a clock delete plug on dash too. talk about a stripped down car. steve at Rebel Mustang II ------------------------------ Date: Tue, 29 Feb 2000 11:33:42 -0500 From: "Timothy M. Grahl" Subject: Re: New question. This is a multi-part message in MIME format. ------=_NextPart_000_0099_01BF82A8.D4995B40 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit One of the reasons I asked was because Ed's King came with radio delete and there is NO hole in the fender nor is there a plug. So it would seem that his King went down the assembly line without an antenna hole. -----Original Message----- From: rebelmust@aol.com To: mustangii@topica.com Date: Tuesday, February 29, 2000 10:40 AM Subject: Re: New question. yes there was a radio delete,it has a hole cover for the radio that is held in with 2 screws from behind I have one here,the car it came off had a plug in the hole for the antenna. after talking to assembly line persons I have been told that the fenders already had the hole for the antenna stamped in them before assembly line installation.It looked stock to me (the plug) and apeared to be orig. paint on the entire car.It also had a clock delete plug on dash too. talk about a stripped down car. steve at Rebel Mustang II _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------=_NextPart_000_0099_01BF82A8.D4995B40 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000229T163342Z END:VCARD ------=_NextPart_000_0099_01BF82A8.D4995B40-- ------------------------------ Date: Tue, 29 Feb 2000 20:10:02 -0500 From: "Randy" Subject: Re: Hello please take me off mailing list, Thankyou ----- Original Message ----- From: To: Sent: Monday, February 28, 2000 12:23 AM Subject: Hello > Well I'm back to about 50% and thats better then some people I know on a good > day. I won't mention names TIM. > Well I know it's winter in most of the country but someone has to be > wrenching on something. I'm about to iron the wrinkles out of my Cross Ram > problem and get the proper linkage made to fire all 8 barrels at the chevy > scum. Anyone else elbows deep in grease this winter? > > Dave > 76 CobraII > ADE MustangII New Used Repro parts and Restoration services. > > www.MustangII.Net The #1 online source for MustangII info > www.MustangII.Com The #1 MustangII parts supersite > www.MOCSEM.Com Mustang Owners Club Of South East Mi > ICQ #24507973 > AOL IM Cobraii976 > MSN Messenger ADEMUSTANGII > ADEMUSTANGII@Hotmail.com > MustangIIThousand@MustangII.Net > > > > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 > ------------------------------ Date: Tue, 29 Feb 2000 20:10:42 -0500 From: "Randy" Subject: Re: Hello please take me off mailing list, Thankyou ----- Original Message ----- From: To: Sent: Monday, February 28, 2000 10:14 AM Subject: Re: Hello > Well, my wrenching session on my 78 coupe is about to get going in full swing > as soon as i get moved into my new house. I've got most of my parts and I've > got the camera ready. Phase one will be installing polygraphite bushings in > the front end. Phase two will be the high lift springs front and back. Phase > three will be the five lug conversion. Phase four will be the addition of the > Weld Dragstars. And Phase five will be the conversion from the RAD 4 speed to > a C4 automatic. Hopefully during all of this I will get a webpage up so > everybody can see the progress. > > Leadfoot Luke > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Tue, 29 Feb 2000 17:17:58 -0800 From: "Darryl Lang (Entex)" Subject: T5 Headers Could someone answer this question...I don't know the answer... mail answers to Mike Dockery mailto:h.dockery@worldnet.att.net -------------------------------------------------------- hi Darryl i signed your guest book with this same question about headers. will any of the headers you can buy fit around the t-5 in the mustangll i know the cyclones wont fit done tried them i`ve got a set of headman headers but i havent gotten around to seeing if they will fit, i hate their design but if they`ll fit heck with it i`ll just have to take it easy over the speed bumps. [he he] . thanks for any knowledge, or direction you can point me in. mike dockery N.C ------------------------------ Date: Tue, 29 Feb 2000 17:48:26 -0800 From: "Vincent Beauvais (home)" Subject: RE: New question. I mentioned this in the "Restoration" forum on the MustangII.net site. My car also has no hole in the fender, which leads me to believe my car came with no radio. At some point, someone installed an aftermarket radio and antenna (in the driver's side fender, not the passenger side). Vince http://www.members.home.net/vbeauvais/kcobra/king.htm -----Original Message----- From: Timothy M. Grahl [mailto:tgrahl@iocenter.net] Sent: Tuesday, February 29, 2000 8:38 AM To: mustangii@topica.com Subject: Re: New question. One of the reasons I asked was because Ed's King came with radio delete and there is NO hole in the fender nor is there a plug. So it would seem that his King went down the assembly line without an antenna hole. -----Original Message----- From: rebelmust@aol.com To: mustangii@topica.com Date: Tuesday, February 29, 2000 10:40 AM Subject: Re: New question. yes there was a radio delete,it has a hole cover for the radio that is held in with 2 screws from behind I have one here,the car it came off had a plug in the hole for the antenna. after talking to assembly line persons I have been told that the fenders already had the hole for the antenna stamped in them before assembly line installation.It looked stock to me (the plug) and apeared to be orig. paint on the entire car.It also had a clock delete plug on dash too. talk about a stripped down car. steve at Rebel Mustang II _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------------------------------ Date: Tue, 29 Feb 2000 18:33:32 -0800 (PST) From: Brian Nadeau Subject: Wheel size Thanks everyone for the help, i think i'll go with 15 X 8 for the rear wheels and i'll leave the front at 13". thanks again. __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com ------------------------------ Date: Tue, 29 Feb 2000 21:47:27 EST From: COBRAII976@aol.com Subject: Re: T5 Headers the only header that was a decent fit around the T-5 was the Dynomax now dicontinued as are the blackjacks and the headmans and the cyclones there all gone search the wharehouses and you might get lucky. if worse comes to worse heat the header bend it out around the bellhousing and pray they don't come back in. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. www.MustangII.Net The #1 online source for MustangII info www.MustangII.Com The #1 MustangII parts supersite www.MOCSEM.Com Mustang Owners Club Of South East Mi ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Wed, 01 Mar 2000 04:13:42 GMT From: "tim thompson" Subject: Re: New question. Earliest factory plug I've seen was on an '82 Granada. Tim >From: "Timothy M. Grahl" >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: Re: New question. >Date: Tue, 29 Feb 2000 08:38:15 -0800 > >One of the reasons I asked was because Ed's King came with radio delete and >there is NO hole in the fender nor is there a plug. >So it would seem that his King went down the assembly line without an >antenna hole. > > >-----Original Message----- >From: rebelmust@aol.com >To: mustangii@topica.com >Date: Tuesday, February 29, 2000 10:40 AM >Subject: Re: New question. > > >yes there was a radio delete,it has a hole cover for the radio that is held >in with 2 screws from behind I have one here,the car it came off had a plug >in the hole for the antenna. after talking to assembly line persons I have >been told that the fenders already had the hole for the antenna stamped in >them before assembly line installation.It looked stock to me (the plug) and >apeared to be orig. paint on the >entire car.It also had a clock delete plug on dash too. talk about a >stripped >down car. >steve at Rebel Mustang II >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 > ><< TimothyM.Grahl.vcf >> ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com ------------------------------ Date: Tue, 29 Feb 2000 21:21:54 -0800 From: "Vincent Beauvais (home)" Subject: Decal kits I knew Graphic-Express made decals for the Cobra II and King Cobra, but I didn't know these guys did too. http://www.phoenixgraphix.com/ford.htm#mustang Anyone have any experience with either of the kits from these companies? ------------------------------ Date: Wed, 1 Mar 2000 00:49:28 -0500 From: "Tim and Pam Allgire" Subject: Re: Wheel size If you are still using the stock 4-bolt pattern make sure you check the back spacing on the 15" wheels you are going to use.If it is not correct ,the wheel will hit on the upper A-arm. -----Original Message----- From: JonandKellie@aol.com To: mustangii@topica.com Date: Monday, February 28, 2000 10:50 PM Subject: Re: Wheel size Depends on the car. The only car that has 13's on it still, is the resto '77 t-top. Even my pinto (souped up, though) has 14's, and hopefully my 74 dragger will come out with 15's in a month or so. _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------------------------------ End of mustangii@topica.com digest, issue 59 -------------------------------------------------------------------------------- Message: 28 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 60 Date: Thu, 02 Mar 2000 03:32:24 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: T5 Headers By alleneugene@yahoo.com Back Spacing By jww159@mustangii.net Re: Decal kits By JBoy911041@aol.com ------------------------------------------------------------ Date: Wed, 1 Mar 2000 16:34:21 -0800 (PST) From: Allen Hickman Subject: Re: T5 Headers Hi: I have a 1977 Mustang with a 302 and T-5. We put Hedman Hedders on it last summer (summit) the passenger's side fit with only mild dinging but the drivers side required us to make a new tube for the fr. pipe and take it under the crossmember (just like passenger side) this also required a remote oil filter, and some chopping on the throw out bearing fork. We also had to make a new transmission crossmember with twin humps. All in all it was a bitch but it did turn out nice. If you need any more info let me know. Allen --- "Darryl Lang (Entex)" wrote: > Could someone answer this question...I don't know > the answer... > > mail answers to Mike Dockery > mailto:h.dockery@worldnet.att.net > -------------------------------------------------------- > hi Darryl i signed your guest book with this > same question about headers. will any of the > headers you can buy fit around the t-5 in the > mustangll i know the cyclones wont fit done > tried them i`ve got a set of headman headers > but i havent gotten around to seeing if they > will fit, i hate their design but if they`ll > fit heck with it i`ll just have to take it easy > over the speed bumps. [he he] . thanks for any > knowledge, or direction you can point me in. > mike dockery N.C > _____________________________________________________________ > Want to find the best email lists? Check out the > Topica 20! > http://www.topica.com/topica20 > __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com ------------------------------ Date: Wed, 1 Mar 2000 19:21:05 -0800 From: "Joseph Werner" Subject: Back Spacing What was the original back spacing on a 78 cobra ii. Also what was the tire and weel size. Joe ------------------------------------------------------------ Get your free email at the Mustang II Network http://www.mustangii.net ------------------------------ Date: Thu, 2 Mar 2000 00:54:55 EST From: JBoy911041@aol.com Subject: Re: Decal kits I got decals from Graphics Express for my '76 Cobra II. Very prompt shipping and high quality product. Would recommend these guys. ------------------------------ End of mustangii@topica.com digest, issue 60 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 27 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 61 Date: Fri, 03 Mar 2000 03:32:15 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- test By chris@cobraii.stangnet.com Re: test By tgrahl@iocenter.net Re: Hello By JonandKellie@aol.com ------------------------------------------------------------ Date: 2 Mar 2000 07:05:46 -0800 From: Chris Pasternak Subject: test Sorry I am testing my new e-mail account ------------------------------------------------- Join a North Sky Community Today! http://communities.northsky.com ------------------------------ Date: Thu, 2 Mar 2000 10:16:11 -0500 From: "Timothy M. Grahl" Subject: Re: test This is a multi-part message in MIME format. ------=_NextPart_000_005D_01BF8430.55A422A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit It's working :) -----Original Message----- From: Chris Pasternak To: mustangii@topica.com Date: Thursday, March 02, 2000 10:11 AM Subject: test >Sorry I am testing my new e-mail account > > >------------------------------------------------- >Join a North Sky Community Today! >http://communities.northsky.com >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 > ------=_NextPart_000_005D_01BF8430.55A422A0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000302T151611Z END:VCARD ------=_NextPart_000_005D_01BF8430.55A422A0-- ------------------------------ Date: Thu, 2 Mar 2000 23:46:48 EST From: JonandKellie@aol.com Subject: Re: Hello Hey great!!! I've been looking all over for these motor mount towers. If you have them, how mush, and how soon could you get them to Idaho?? thanx for the advise, and just to make sure; This will strap a 351 to a '74, right?? ------------------------------ End of mustangii@topica.com digest, issue 61 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 26 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 62 Date: Sat, 04 Mar 2000 03:32:29 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: Hello By windmill35@prodigy.net Re: test By jenhauss@tds.net GAS OUT - I DO NOT usually forward things, but.... By john.heemskerk@agra.com Re: GAS OUT - I DO NOT usually forward things, but.... By Cobraii976@aol.com HELP By Cobraii976@aol.com unsubscribe By Cobraii976@aol.com ------------------------------------------------------------ Date: Fri, 3 Mar 2000 10:25:59 -0800 From: "PHIL L SCHMIDT" Subject: Re: Hello The set of frame to motor mounts for the V8 engine direct bolt in no modifications is 95 & 11 ups shipping & handling add 5 for cod (cashiers check or money order) ups delivery have in stock ready to ship Phil Must II Spec Shop. ----- Original Message ----- From: To: Sent: Thursday, March 02, 2000 8:48 PM Subject: Re: Hello > Hey great!!! > I've been looking all over for these motor mount towers. If you have them, > how mush, and how soon could you get them to Idaho?? > thanx for the advise, and just to make sure; This will strap a 351 to a > '74, right?? > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Fri, 03 Mar 2000 11:12:31 -0500 From: JENNIFER HAUSSERMAN Subject: Re: test PLEASE TAKE ME OFF YOUR MAILING LIST. Chris Pasternak wrote: > Sorry I am testing my new e-mail account > > > ------------------------------------------------- > Join a North Sky Community Today! > http://communities.northsky.com > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Fri, 3 Mar 2000 14:36:37 -0800 From: John Heemskerk Subject: GAS OUT - I DO NOT usually forward things, but.... This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01BF8560.EFC12BA0 Content-Type: text/plain; charset="iso-8859-1" Last year on April 30,1999, a gas out was staged across Canada and the U.S. to bring the price of gas down, and it worked. It's time to do something about it again. Only this time lets make it for three days instead of just one. The so-called oil cartel decided to slow production to drive up gasoline prices. Lets see how many Canadian\American people we can get to ban together for a three day period in April, NOT TO BUY ANY GASOLINE, during those three days. LETS HAVE A GAS OUT. Do not buy any gasoline from APRIL 7,2000, THROUGH APRIL 9, 2000. Buy what you need before the dates listed above, or after, but try not to buy any during the GAS OUT. If you want to help, just send this to everyone you know and ask them to do the same. We brought the prices down once before, and we can do it again. Come on North America lets stand together. WE CAN MAKE A DIFFERENCE!!!!!!!!!!!!!!!!!!!! Even if you receive this 100 times keep passing it around, this way you know everyone is being informed and no one will forget!!!!!!!!!!!!!!! ------_=_NextPart_001_01BF8560.EFC12BA0 Content-Type: text/html; charset="iso-8859-1" Last year on April 30,1999, a gas out was staged across Canada and the U.S. to bring the price of gas down, and it worked. It's time to do something about it again. Only this time lets make it for three days instead of just one. The so-called oil cartel decided to slow production to drive up gasoline prices. Lets see how many Canadian\American people we can get to ban together for a three day period in April, NOT TO BUY ANY GASOLINE, during those three days. LETS HAVE A GAS OUT. Do not buy any gasoline from APRIL 7,2000, THROUGH APRIL 9, 2000. Buy what you need before the dates listed above, or after, but try not to buy any during the GAS OUT. If you want to help, just send this to everyone you know and ask them to do the same. We brought the prices down once before, and we can do it again. Come on North America lets stand together. WE CAN MAKE A DIFFERENCE!!!!!!!!!!!!!!!!!!!! Even if you receive this 100 times keep passing it around, this way you know everyone is being informed and no one will forget!!!!!!!!!!!!!!! ------_=_NextPart_001_01BF8560.EFC12BA0-- ------------------------------ Date: Fri, 3 Mar 2000 17:38:27 EST From: COBRAII976@aol.com Subject: Re: GAS OUT - I DO NOT usually forward things, but.... John I was about to forward that you beat me to it. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. www.MustangII.Net The #1 online source for MustangII info www.MustangII.Com The #1 MustangII parts supersite www.MOCSEM.Com Mustang Owners Club Of South East Mi ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Fri, 3 Mar 2000 20:02:42 EST From: COBRAII976@aol.com Subject: HELP HELP ------------------------------ Date: Fri, 3 Mar 2000 20:11:12 EST From: COBRAII976@aol.com Subject: unsubscribe unsubscribe ------------------------------ End of mustangii@topica.com digest, issue 62 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 25 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 63 Date: Sun, 05 Mar 2000 03:31:37 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: unsubscribe By drnix@wcc.net Leaving By Cobraii976@aol.com need motor mounts By Gr8pmkn1969@aol.com Re: need motor mounts By windmill35@prodigy.net Re: Leaving By BCSADER110@AOL.COM Re: Hello By JonandKellie@aol.com Re: need motor mounts By JonandKellie@aol.com Re: Leaving By JonandKellie@aol.com ------------------------------------------------------------ Date: Sat, 04 Mar 2000 10:30:13 -0600 From: Donnie Nix Subject: Re: unsubscribe Please unsubscribe me. ------------------------------ Date: Sat, 4 Mar 2000 19:59:12 EST From: COBRAII976@aol.com Subject: Leaving As of today I will no longer be associated with MustangII.Net. As for my affiliation with MustangII.Com that is yet to be seen. As for the parts EVERYTHING must go and it's all on sale so now is the time to get in here and get it done. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services www.MustangII.Com The #1 MustangII parts supersite ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Sat, 4 Mar 2000 21:27:26 EST From: Gr8pmkn1969@aol.com Subject: need motor mounts I NEED left and right motor mounts for a '76 mustangII stallion with a 2.8 v-6. Cost is a consideration but I still need 'em. I can pay for shipping ------------------------------ Date: Sat, 4 Mar 2000 22:38:19 -0800 From: "PHIL L SCHMIDT" Subject: Re: need motor mounts A orignal great shape ford orignal used 48.00 set nos new ford 88.70 set of 2 ups s&h 12.30 add 5 for ups cod delivery.Above motor mounts are in stock for immidate delivery.Phil Mustang II Specialty Shop 175 Lee Rd 479 Phenix City,Al. 36870-8977 334 298-3038 pschmidt65@prodigy.net ----- Original Message ----- From: To: Sent: Saturday, March 04, 2000 6:27 PM Subject: need motor mounts > I NEED left and right motor mounts for a '76 mustangII stallion with a 2.8 > v-6. Cost is a consideration but I still need 'em. I can pay for shipping > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Sat, 4 Mar 2000 23:24:04 EST From: BCSADER110@aol.com Subject: Re: Leaving Hey Dave, How much do you want for a driver side brushed aluminum dash panel? Brian ------------------------------ Date: Sat, 4 Mar 2000 23:41:11 EST From: JonandKellie@aol.com Subject: Re: Hello ------------------------------ Date: Sun, 5 Mar 2000 00:36:47 EST From: JonandKellie@aol.com Subject: Re: need motor mounts Gottem' I still gottem on the engine off a 74 2.8.. email me with an offer. ------------------------------ Date: Sun, 5 Mar 2000 00:43:10 EST From: JonandKellie@aol.com Subject: Re: Leaving hey Dave, I'm still looking for ideas. (whether to use original towers and mounts, or the 289 mounts) I got the 289 mounts, and they look cool, but I gotta say they don't really mount to the stock frame stands. so whatcha got to fix either of these problems. ------------------------------ End of mustangii@topica.com digest, issue 63 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 24 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 64 Date: Mon, 06 Mar 2000 03:31:45 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: Wheel size By zstlkr@aol.com ------------------------------------------------------------ Date: Sun, 5 Mar 2000 13:28:19 EST From: ZSTLKR@aol.com Subject: Re: Wheel size i have 15 by 7 aluminum directionals on mine w/p205/60r 15's in the front an p235/60r15's in the rear ------------------------------ End of mustangii@topica.com digest, issue 64 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 23 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 65 Date: Tue, 07 Mar 2000 03:32:18 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: unsubscribe By drnix@wcc.net The many unsubscribe posts By tims302@hotmail.com Re: The many unsubscribe posts By Cobraii976@aol.com Frame Rail Mounts By RCStenic@prodigy.net Re: Frame Rail Mounts By Cobraii976@aol.com Re: Frame Rail Mounts By Cobraii976@aol.com ------------------------------------------------------------ Date: Mon, 06 Mar 2000 18:28:29 -0600 From: Donnie Nix Subject: Re: unsubscribe unsubscribe drnix@wcc.net wrote: > Please unsubscribe me. > > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Tue, 07 Mar 2000 04:40:59 GMT From: "tim thompson" Subject: The many unsubscribe posts Tim, how about a post on how these folks can do this themselves? I figure if they signed up, they should be able to unsub. Tim >From: drnix@wcc.net >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: Re: unsubscribe >Date: Mon, 06 Mar 2000 16:29:06 -0800 > >unsubscribe > >drnix@wcc.net wrote: > > > Please unsubscribe me. > > > > _____________________________________________________________ > > Want to find the best email lists? Check out the Topica 20! > > http://www.topica.com/topica20 > > > >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com ------------------------------ Date: Mon, 6 Mar 2000 23:44:47 EST From: COBRAII976@aol.com Subject: Re: The many unsubscribe posts I was hoping the same thing. but after searching Topica for the commands I came up empty. and nowhere on the sign up page is the unsub option. I think that this portion of the list needs to be better thought out. as people grow tired of the 2-3 posts a week filling there mail box to overflowing they will want to leave. So I believe the problem needs to be addressed. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Tue, 7 Mar 2000 00:50:47 -0600 From: "Ralph C Stenic" Subject: Frame Rail Mounts This is a multi-part message in MIME format. ------=_NextPart_000_0005_01BF87CF.2D08E180 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Okay I know this subject is old. Does any one know if there is a = difference between the frame rail motor mounts for the V6 to the V8.=20 Ralph 1976 Cobra II ------=_NextPart_000_0005_01BF87CF.2D08E180 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Okay I know this subject is old. Does any one know = if there is=20 a difference between the frame rail motor mounts for the V6 to the V8.=20 Ralph 1976 Cobra II ------=_NextPart_000_0005_01BF87CF.2D08E180-- ------------------------------ Date: Tue, 7 Mar 2000 00:42:01 EST From: COBRAII976@aol.com Subject: Re: Frame Rail Mounts I know Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Tue, 7 Mar 2000 00:43:03 EST From: COBRAII976@aol.com Subject: Re: Frame Rail Mounts there the same. I love suspense ------------------------------ End of mustangii@topica.com digest, issue 65 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 22 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 66 Date: Wed, 08 Mar 2000 03:32:19 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Unsubscribe procedure By tgrahl@iocenter.net Four Speed Manual question. By tgrahl@iocenter.net Re: Four Speed Manual question. By Cobraii976@aol.com Re: Four Speed Manual question. By Cobraii976@aol.com Network Update By tgrahl@iocenter.net Re: Four Speed Manual question. By tgrahl@iocenter.net Re: Frame Rail Mounts By BCSADER110@AOL.COM Re: Four Speed Manual question. By Cobraii976@aol.com Re: Frame Rail Mounts By Cobraii976@aol.com Re: Four Speed Manual question. By tgrahl@iocenter.net Re: Four Speed Manual question. By Cobraii976@aol.com Clutch for 1974 Mustang II By david.maloney@sycamorenet.com Re: Clutch for 1974 Mustang II By Cobraii976@aol.com RE: Clutch for 1974 Mustang II By david.maloney@sycamorenet.com Re: Leaving By rebelmust@aol.com RE: Unsubscribe procedure By john.heemskerk@agra.com Need Drop top off topic By Cobraii976@aol.com Re: Clutch for 1974 Mustang II By RCStenic@prodigy.net Re: Need Drop top off topic By BCSADER110@AOL.COM Re: Four Speed Manual question. By Gr8pmkn1969@aol.com Vinyl Paint 0r Dye By jheemske@infoserve.net ------------------------------------------------------------ Date: Tue, 7 Mar 2000 08:21:24 -0500 From: "Timothy M. Grahl" Subject: Unsubscribe procedure This is a multi-part message in MIME format. ------=_NextPart_000_0050_01BF880E.206CE3B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit To unsubscribe from this list, follow the step below. Go to the Mustang II Network and click on the "Mailing List" menu option. In the center of the screen you will see 4 fields Full Name: List Name: Choice: Email Address Leave the list name as Mustang II With the dropdown box on "Choice" select Unsubscribe Enter your email address that you used to subscribe to the list Click on the submit button. You will receive an email requesting a reply to confirm your unsubscription. In your mail program, reply to the email. You will be unsubscribe from the list automatically. This procedure has been tested. Tim -----Original Message----- From: Cobraii976@aol.com To: mustangii@topica.com Date: Monday, March 06, 2000 11:44 PM Subject: Re: The many unsubscribe posts I was hoping the same thing. but after searching Topica for the commands I came up empty. and nowhere on the sign up page is the unsub option. I think that this portion of the list needs to be better thought out. as people grow tired of the 2-3 posts a week filling there mail box to overflowing they will want to leave. So I believe the problem needs to be addressed. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------=_NextPart_000_0050_01BF880E.206CE3B0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000307T132124Z END:VCARD ------=_NextPart_000_0050_01BF880E.206CE3B0-- ------------------------------ Date: Tue, 7 Mar 2000 08:33:18 -0500 From: "Timothy M. Grahl" Subject: Four Speed Manual question. This is a multi-part message in MIME format. ------=_NextPart_000_00B1_01BF880F.C9D241B0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_00B2_01BF880F.C9D241B0" ------=_NextPart_001_00B2_01BF880F.C9D241B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I just got back from Iowa with a 77 Cobra II. Sweet car, one small problem. Shifting from 1st to 2nd gear is a bear. It wants to grind in second = and pop out. The rest of the gears are fine. Could this be a simple = adjustment? =20 Timothy M. Grahl Web Development and E-Commerce Specialist Internet Operations Center 200 Galleria Officentre Suite 109 Southfield, Michigan 48034 tgrahl@iocenter.net 248.204.8806 ------=_NextPart_001_00B2_01BF880F.C9D241B0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I just got back from Iowa with a 77 = Cobra=20 II. Sweet car, one small = problem. Shifting from 1st to 2nd gear is a bear. = It wants=20 to grind in second and pop out. The rest of the gears are=20 fine. Could this be a simple adjustment? Timothy M. Grahl Web Development = and=20 E-Commerce Specialist Internet Operations Center 200 Galleria=20 Officentre Suite 109 Southfield, Michigan 48034 tgrahl@iocenter.net 248.204.88= 06 ------=_NextPart_001_00B2_01BF880F.C9D241B0-- ------=_NextPart_000_00B1_01BF880F.C9D241B0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000307T133318Z END:VCARD ------=_NextPart_000_00B1_01BF880F.C9D241B0-- ------------------------------ Date: Tue, 7 Mar 2000 08:39:23 EST From: COBRAII976@aol.com Subject: Re: Four Speed Manual question. Could be a bent fork a bad stop or the tranny could be on it's way out. if the rest are shifting ok I would say the fork is bent or the 1-2 cluster is bad. Either way it's got to come out to be fixed. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Tue, 7 Mar 2000 08:45:57 EST From: COBRAII976@aol.com Subject: Re: Four Speed Manual question. on further looking at that I would say the second gear shift fork is bent and the gears are bad, looks like your in for some serious parts hunting and work. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Tue, 7 Mar 2000 08:49:24 -0500 From: "Timothy M. Grahl" Subject: Network Update This is a multi-part message in MIME format. ------=_NextPart_000_00C9_01BF8812.09A32960 Content-Type: multipart/alternative; boundary="----=_NextPart_001_00CA_01BF8812.09A32960" ------=_NextPart_001_00CA_01BF8812.09A32960 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I want to thank everyone for the comments and suggestions that are = keeping the Mustang II Network strong. We are averaging 150 - 200 unique hits per day on the site and have had = visitors from Japan and Brazil sign the Guestbook. We have also had = parts requests from Puerto Rico and Mexico on the Mustang II Parts = Distributors site. Keep up the good work and I will make sure that the = Mustang II Network continues to provide the best information possible. The link for the Mustang II Organization gallery has temporarily been = disabled due to the gallery being unavailable on the Organization site. = I have been in contact with the webmaster of the Organization site to = discuss link exchange possibilities. I received a reply that basically = stated that he (Sergio) does not have the last say in matters of the = site. Though I will probably keep links to the Organization site, it = appears that those in control of the Organization site are hesitant on = providing cooperation with the Mustang II Network. All that I can say = it that my attempts to cooperate with the webmasters of the Organization = site have met with roadblock. Hopefully in the future we can come to a = better understanding and use both of our talents for the betterment of = the II. Timothy M. Grahl Webmaster Mustang II Network Mustang II Parts Distributors ------=_NextPart_001_00CA_01BF8812.09A32960 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I want to thank everyone for the = comments and=20 suggestions that are keeping the Mustang II Network strong. We are averaging 150 - 200 unique hits per day on = the site and=20 have had visitors from Japan and Brazil sign the Guestbook. We = have also=20 had parts requests from Puerto Rico and Mexico on the Mustang II Parts=20 Distributors site. Keep up the good work and I will make sure that = the=20 Mustang II Network continues to provide the best information=20 possible. The link for the Mustang II Organization gallery has = temporarily been disabled due to the gallery being unavailable on the=20 Organization site. I have been in contact with the webmaster = of the=20 Organization site to discuss link exchange possibilities. I = received=20 a reply that basically stated that he (Sergio) does not have the last = say in=20 matters of the site. Though I will probably keep links to = the=20 Organization site, it appears that those in control of the Organization = site are=20 hesitant on providing cooperation with the Mustang II = Network. All=20 that I can say it that my attempts to cooperate with the webmasters of = the=20 Organization site have met with roadblock. Hopefully in the future = we can=20 come to a better understanding and use both of our talents for the = betterment of=20 the II. Timothy M. = Grahl Webmaster Mustang II Network Mustang II Parts=20 Distributors ------=_NextPart_001_00CA_01BF8812.09A32960-- ------=_NextPart_000_00C9_01BF8812.09A32960 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000307T134924Z END:VCARD ------=_NextPart_000_00C9_01BF8812.09A32960-- ------------------------------ Date: Tue, 7 Mar 2000 08:51:22 -0500 From: "Timothy M. Grahl" Subject: Re: Four Speed Manual question. This is a multi-part message in MIME format. ------=_NextPart_000_00D5_01BF8812.4FFEA2E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I found a 4 speed manual trans a couple of months ago for the II that we are restoring for $200, looks like I'll look for another one and swap it in. -----Original Message----- From: Cobraii976@aol.com To: mustangii@topica.com Date: Tuesday, March 07, 2000 8:45 AM Subject: Re: Four Speed Manual question. on further looking at that I would say the second gear shift fork is bent and the gears are bad, looks like your in for some serious parts hunting and work. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------=_NextPart_000_00D5_01BF8812.4FFEA2E0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000307T135122Z END:VCARD ------=_NextPart_000_00D5_01BF8812.4FFEA2E0-- ------------------------------ Date: Tue, 7 Mar 2000 09:34:08 EST From: BCSADER110@aol.com Subject: Re: Frame Rail Mounts Hey Dave, How much do you want for a driver side brushed aluminum dash trim? ------------------------------ Date: Tue, 7 Mar 2000 09:36:46 EST From: COBRAII976@aol.com Subject: Re: Four Speed Manual question. well depending on what the car is and if it's 100% correct I would rather have the matching trans. then again if it's just a driver I would throw the RAD away there a nice 20 year old trans if you don't drive it much, but for a real street car you need a way better trans. even summer driving here I can run through a RAD a year why do you think everything I have is SROD? Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Tue, 7 Mar 2000 09:37:23 EST From: COBRAII976@aol.com Subject: Re: Frame Rail Mounts 50 plush shipping ------------------------------ Date: Tue, 7 Mar 2000 09:53:03 -0500 From: "Timothy M. Grahl" Subject: Re: Four Speed Manual question. This is a multi-part message in MIME format. ------=_NextPart_000_0127_01BF881A.EDFE5AA0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I really don't plan on driving it daily. Probably to and from shows and meetings and the occasional weekend. I would rather have an original trans to keep the car as close to original as possible. -----Original Message----- From: Cobraii976@aol.com To: mustangii@topica.com Date: Tuesday, March 07, 2000 9:36 AM Subject: Re: Four Speed Manual question. well depending on what the car is and if it's 100% correct I would rather have the matching trans. then again if it's just a driver I would throw the RAD away there a nice 20 year old trans if you don't drive it much, but for a real street car you need a way better trans. even summer driving here I can run through a RAD a year why do you think everything I have is SROD? Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------=_NextPart_000_0127_01BF881A.EDFE5AA0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000307T145303Z END:VCARD ------=_NextPart_000_0127_01BF881A.EDFE5AA0-- ------------------------------ Date: Tue, 7 Mar 2000 09:55:29 EST From: COBRAII976@aol.com Subject: Re: Four Speed Manual question. well if thats the case fixing the ORIGINAL trans would make sense. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Tue, 7 Mar 2000 12:32:09 -0500 From: "Maloney, David" Subject: Clutch for 1974 Mustang II My son has a 1974 Mustang II (6cyl). He needs to replace the clutch, but has been unsuccessful in locating one. Does anyone know where he can locate, or send his to be rebuilt? Thanks Yes he will consider selling the car if someone is interested. ------------------------------ Date: Tue, 7 Mar 2000 12:30:23 EST From: COBRAII976@aol.com Subject: Re: Clutch for 1974 Mustang II Well, I can get you the clutch for it. But where is it at? and price. The last one I tried to buy a supposed friend SCREWED me on so e-mail me privately on this one thanks. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Tue, 7 Mar 2000 12:39:43 -0500 From: "Maloney, David" Subject: RE: Clutch for 1974 Mustang II I am located in Massachusetts. -----Original Message----- From: Cobraii976@aol.com [mailto:Cobraii976@aol.com] Sent: Tuesday, March 07, 2000 11:31 AM To: mustangii@topica.com Subject: Re: Clutch for 1974 Mustang II Well, I can get you the clutch for it. But where is it at? and price. The last one I tried to buy a supposed friend SCREWED me on so e-mail me privately on this one thanks. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------------------------------ Date: Tue, 7 Mar 2000 15:14:36 EST From: REBELMUST@aol.com Subject: Re: Leaving Please send us a list of all parts you have for sale and prices,thanks,steve rebel mustang II ------------------------------ Date: Tue, 7 Mar 2000 12:45:41 -0800 From: John Heemskerk Subject: RE: Unsubscribe procedure This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01BF8876.1B6F7700 Content-Type: text/plain; charset="iso-8859-1" Timothy - How do I change to Digest-List? John -----Original Message----- From: Timothy M. Grahl [mailto:tgrahl@iocenter.net] Sent: 07 March, 2000 5:24 AM To: mustangii@topica.com Subject: Unsubscribe procedure To unsubscribe from this list, follow the step below. Go to the Mustang II Network and click on the "Mailing List" menu option. In the center of the screen you will see 4 fields Full Name: List Name: Choice: Email Address Leave the list name as Mustang II With the dropdown box on "Choice" select Unsubscribe Enter your email address that you used to subscribe to the list Click on the submit button. You will receive an email requesting a reply to confirm your unsubscription. In your mail program, reply to the email. You will be unsubscribe from the list automatically. This procedure has been tested. Tim -----Original Message----- From: Cobraii976@aol.com To: mustangii@topica.com Date: Monday, March 06, 2000 11:44 PM Subject: Re: The many unsubscribe posts I was hoping the same thing. but after searching Topica for the commands I came up empty. and nowhere on the sign up page is the unsub option. I think that this portion of the list needs to be better thought out. as people grow tired of the 2-3 posts a week filling there mail box to overflowing they will want to leave. So I believe the problem needs to be addressed. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------_=_NextPart_001_01BF8876.1B6F7700 Content-Type: text/html; charset="iso-8859-1" Timothy - How do I change to Digest-List? John -----Original Message----- From: Timothy M. Grahl [mailto:tgrahl@iocenter.net] Sent: 07 March, 2000 5:24 AM To: mustangii@topica.com Subject: Unsubscribe procedure To unsubscribe from this list, follow the step below. Go to the Mustang II Network and click on the "Mailing List" menu option. In the center of the screen you will see 4 fields Full Name: List Name: Choice: Email Address Leave the list name as Mustang II With the dropdown box on "Choice" select Unsubscribe Enter your email address that you used to subscribe to the list Click on the submit button. You will receive an email requesting a reply to confirm your unsubscription. In your mail program, reply to the email. You will be unsubscribe from the list automatically. This procedure has been tested. Tim -----Original Message----- From: Cobraii976@aol.com To: mustangii@topica.com Date: Monday, March 06, 2000 11:44 PM Subject: Re: The many unsubscribe posts I was hoping the same thing. but after searching Topica for the commands I came up empty. and nowhere on the sign up page is the unsub option. I think that this portion of the list needs to be better thought out. as people grow tired of the 2-3 posts a week filling there mail box to overflowing they will want to leave. So I believe the problem needs to be addressed. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------_=_NextPart_001_01BF8876.1B6F7700-- ------------------------------ Date: Tue, 7 Mar 2000 18:22:16 EST From: COBRAII976@aol.com Subject: Need Drop top off topic Ok Looking for a Ford Drop top. 50-60's perferred but would consider a fox stang, Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Tue, 7 Mar 2000 19:30:43 -0600 From: "Ralph C Stenic" Subject: Re: Clutch for 1974 Mustang II How much for the car? E-mail me in privet to let me know. Ralph rcstenic@prodigy.net ----- Original Message ----- From: "Maloney, David" To: Sent: Tuesday, March 07, 2000 11:26 AM Subject: Clutch for 1974 Mustang II > My son has a 1974 Mustang II (6cyl). He needs to replace the clutch, but has > been unsuccessful in locating one. > Does anyone know where he can locate, or send his to be rebuilt? > > Thanks > > Yes he will consider selling the car if someone is interested. > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Tue, 7 Mar 2000 20:40:05 EST From: BCSADER110@aol.com Subject: Re: Need Drop top off topic Hey Dave, Can I send you a check for the dash trim? If so I need the address and the complete amount including shipping and handling. Thanks in advance. Brian ------------------------------ Date: Wed, 8 Mar 2000 00:17:29 EST From: Gr8pmkn1969@aol.com Subject: Re: Four Speed Manual question. I had to rebuild the 4-speed for my 76 V-8 stallion and it cost me over $ 1,000. I had a similar problem with the 1-2 shift and it turned out that my 2nd gear was bad. Hope that's not you're case because a new gear had to be CUSTOM MADE for my car. Eugene,78 King Cobra ------------------------------ Date: Wed, 8 Mar 2000 00:43:50 -0800 From: "John Heemskerk" Subject: Vinyl Paint 0r Dye Okay, I know this has been on the List many times. But I did not keep the info. What is the best vinyl paint or dye to use. One car needs to be done same colour and the other wants a colour change from white to black??? Make, and where to get it. Glad the list is back up. Good job. Thanks John 77 Mach 1 ------------------------------ End of mustangii@topica.com digest, issue 66 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 21 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 67 Date: Thu, 09 Mar 2000 03:32:45 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: Unsubscribe procedure By tgrahl@iocenter.net Re: Four Speed Manual question. By Cobraii976@aol.com Re: Four Speed Manual question. By tgrahl@iocenter.net Re: Four Speed Manual question. By Cobraii976@aol.com Re: Four Speed Manual question. By tgrahl@iocenter.net four speed By Cobraii976@aol.com Re: Four Speed Manual question. By Cobraii976@aol.com Re: four speed By tgrahl@iocenter.net Re: four speed By Cobraii976@aol.com WELL THIS COULD BE MY LAST POST By Cobraii976@aol.com taking a poll By Cobraii976@aol.com Re: taking a poll By stang2boy@aol.com Re: taking a poll By RCStenic@prodigy.net Re: WELL THIS COULD BE MY LAST POST By tims302@hotmail.com Re: Four Speed Manual question. By jkepling@gte.net Re: WELL THIS COULD BE MY LAST POST By jkepling@gte.net Re: Four Speed Manual question. By enwilkin@mail.pittstate.edu Re: WELL THIS COULD BE MY LAST POST By Cobraii976@aol.com No More By stangii@rhinotec.com Re: No More By windmill35@prodigy.net Re: No More By tims302@hotmail.com ------------------------------------------------------------ Date: Wed, 8 Mar 2000 09:24:47 -0500 From: "Timothy M. Grahl" Subject: Re: Unsubscribe procedure This is a multi-part message in MIME format. ------=_NextPart_000_00B4_01BF88E0.25DAA080 Content-Type: multipart/alternative; boundary="----=_NextPart_001_00B5_01BF88E0.25DAA080" ------=_NextPart_001_00B5_01BF88E0.25DAA080 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable If you would like to have the messages send to your daily in digest = mode, please let me know and I set it up for you. I don't think there = is an automated way to do it yet. Tim Grahl -----Original Message----- From: John Heemskerk To: 'mustangii@topica.com' Date: Tuesday, March 07, 2000 3:44 PM Subject: RE: Unsubscribe procedure Timothy -=20 How do I change to Digest-List?=20 John=20 -----Original Message-----=20 From: Timothy M. Grahl [mailto:tgrahl@iocenter.net]=20 Sent: 07 March, 2000 5:24 AM=20 To: mustangii@topica.com=20 Subject: Unsubscribe procedure=20 =20 =20 To unsubscribe from this list, follow the step below.=20 Go to the Mustang II Network and click on the "Mailing List" menu = option.=20 In the center of the screen you will see 4 fields=20 Full Name:=20 List Name:=20 Choice:=20 Email Address=20 Leave the list name as Mustang II=20 With the dropdown box on "Choice" select Unsubscribe=20 Enter your email address that you used to subscribe to the list=20 Click on the submit button.=20 You will receive an email requesting a reply to confirm your = unsubscription.=20 In your mail program, reply to the email.=20 You will be unsubscribe from the list automatically. This = procedure has=20 been tested.=20 Tim=20 =20 =20 -----Original Message-----=20 From: Cobraii976@aol.com =20 To: mustangii@topica.com =20 Date: Monday, March 06, 2000 11:44 PM=20 Subject: Re: The many unsubscribe posts=20 =20 =20 I was hoping the same thing. but after searching Topica for the = commands I=20 came up empty. and nowhere on the sign up page is the unsub option. = I think=20 that this portion of the list needs to be better thought out. as = people grow=20 tired of the 2-3 posts a week filling there mail box to overflowing = they=20 will=20 want to leave. So I believe the problem needs to be addressed.=20 =20 =20 Dave=20 76 CobraII=20 ADE MustangII New Used Repro parts and Restoration services.=20 ICQ #24507973=20 AOL IM Cobraii976=20 MSN Messenger ADEMUSTANGII=20 ADEMUSTANGII@Hotmail.com=20 MustangIIThousand@MustangII.Net=20 =20 =20 =20 _____________________________________________________________=20 Want to find the best email lists? Check out the Topica 20!=20 http://www.topica.com/topica20=20 =20 ------=_NextPart_001_00B5_01BF88E0.25DAA080 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable If you would like to have the messages send to your = daily in=20 digest mode, please let me know and I set it up for you. I don't = think=20 there is an automated way to do it yet. Tim Grahl -----Original = Message----- From:=20 John Heemskerk To:=20 'mustangii@topica.com' = D= ate:=20 Tuesday, March 07, 2000 3:44 PM Subject: RE: Unsubscribe=20 procedure Timothy - How do I change to Digest-List? John -----Original Message----- From:=20 Timothy M. Grahl [mailto:tgrahl@iocenter.net]=20 Sent: 07 March, 2000 5:24 AM To:=20 mustangii@topica.com Subject: Unsubscribe=20 procedure To unsubscribe from this list, follow the step = below.=20 Go to the Mustang II Network and click on the = "Mailing=20 List" menu option. In the center of the screen you will see 4 = fields=20 Full Name: List = Name:=20 Choice: Email = Address Leave the list name as Mustang II With the dropdown box on "Choice" select = Unsubscribe=20 Enter your email address that you used to = subscribe to the=20 list Click on the submit button. = You will receive an email requesting a reply to = confirm your=20 unsubscription. In your mail program, = reply to the=20 email. You will be unsubscribe from the list=20 automatically. This procedure has been=20 tested. Tim -----Original Message----- From:=20 Cobraii976@aol.com To:=20 mustangii@topica.com Date: Monday, March 06, 2000 11:44 PM Subject: Re: The many unsubscribe posts I was hoping the same thing. but after searching = Topica for=20 the commands I came up empty. and nowhere = on the=20 sign up page is the unsub option. I think that this=20 portion of the list needs to be better thought out. as people = grow=20 tired of the 2-3 posts a week filling there mail = box to=20 overflowing they will want=20 to leave. So I believe the problem needs to be addressed. = Dave 76 CobraII = ADE MustangII New Used Repro parts and Restoration = services.=20 ICQ #24507973 AOL IM=20 Cobraii976 MSN Messenger = ADEMUSTANGII=20 ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________=20 Want to find the best email lists? Check out the = Topica=20 20! http://www.topica.com/topica20=20 ------=_NextPart_001_00B5_01BF88E0.25DAA080-- ------=_NextPart_000_00B4_01BF88E0.25DAA080 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000308T142447Z END:VCARD ------=_NextPart_000_00B4_01BF88E0.25DAA080-- ------------------------------ Date: Wed, 8 Mar 2000 15:34:58 EST From: COBRAII976@aol.com Subject: Re: Four Speed Manual question. That sounds about right to fix a rad trans, Moral of the story test drive and have it checked out by someone competent before you buy it other wise your the moron of the story with a nice looking car that needs a 1000 bucks in tranny work. But as they say better you then me and being a parts guy I boxes of 4 speed stuff so I'm good to go. > I had to rebuild the 4-speed for my 76 V-8 stallion and it cost me over $ > 1,000. I had a similar problem with the 1-2 shift and it turned out that my > > 2nd gear was bad. Hope that's not you're case because a new gear had to be > CUSTOM MADE for my car. > > Eugene,78 King Cobra Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Wed, 8 Mar 2000 15:45:22 -0500 From: "Timothy M. Grahl" Subject: Re: Four Speed Manual question. This is a multi-part message in MIME format. ------=_NextPart_000_010D_01BF8915.50314CF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I have already had a transmission expert look at the car and estimate $300 to fix. Nice to have friends who work in the transmission industry. If worse comes to worse, I have a line on another 4-speed from a scrapped vehicle. I guess I am just lucky. Besides, for the price I paid, the car is worth the money it will take to fix the small problems. -----Original Message----- From: Cobraii976@aol.com To: mustangii@topica.com Date: Wednesday, March 08, 2000 3:34 PM Subject: Re: Four Speed Manual question. That sounds about right to fix a rad trans, Moral of the story test drive and have it checked out by someone competent before you buy it other wise your the moron of the story with a nice looking car that needs a 1000 bucks in tranny work. But as they say better you then me and being a parts guy I boxes of 4 speed stuff so I'm good to go. > I had to rebuild the 4-speed for my 76 V-8 stallion and it cost me over $ > 1,000. I had a similar problem with the 1-2 shift and it turned out that my > > 2nd gear was bad. Hope that's not you're case because a new gear had to be > CUSTOM MADE for my car. > > Eugene,78 King Cobra Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------=_NextPart_000_010D_01BF8915.50314CF0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000308T204522Z END:VCARD ------=_NextPart_000_010D_01BF8915.50314CF0-- ------------------------------ Date: Wed, 8 Mar 2000 15:49:43 EST From: COBRAII976@aol.com Subject: Re: Four Speed Manual question. 300 to fix is not bad if the gears and the forks COULD be bought you better start looking for a 4 speed. I have parts but alas there not forsale. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Wed, 8 Mar 2000 15:55:19 -0500 From: "Timothy M. Grahl" Subject: Re: Four Speed Manual question. This is a multi-part message in MIME format. ------=_NextPart_000_011B_01BF8916.B3F2C1A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit With some of the parts I have left over, I am sure I can find someone who has them and would be willing to work out a deal. I even got extra parts with the car that I won't be using. Someone should be in the market for a used rear spoiler and side louvers. I'll have to put the word out for what I am looking for and what I have to offer. -----Original Message----- From: Cobraii976@aol.com To: mustangii@topica.com Date: Wednesday, March 08, 2000 3:50 PM Subject: Re: Four Speed Manual question. 300 to fix is not bad if the gears and the forks COULD be bought you better start looking for a 4 speed. I have parts but alas there not forsale. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------=_NextPart_000_011B_01BF8916.B3F2C1A0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000308T205519Z END:VCARD ------=_NextPart_000_011B_01BF8916.B3F2C1A0-- ------------------------------ Date: Wed, 8 Mar 2000 15:56:40 EST From: COBRAII976@aol.com Subject: four speed Hey Tim while your out searching for tranny parts make sure you get the spacer plate the one that has been sitting here for you since November went out in a box today and I'm out of stock on it. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Wed, 8 Mar 2000 15:59:23 EST From: COBRAII976@aol.com Subject: Re: Four Speed Manual question. Thats cool you got such a good deal on it. You did good work oh thats right all you had was pick it up and pay someone else did the deal for you, Typical well I must say it's a nice car to bad it's not really yours someone else built it, And hey atleast nobody fucked out out of it after the deal was made I just had that happen and that moron went on the banned from ever buying parts here list, Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Wed, 8 Mar 2000 16:01:45 -0500 From: "Timothy M. Grahl" Subject: Re: four speed This is a multi-part message in MIME format. ------=_NextPart_000_0131_01BF8917.9A32B210 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Thanks for reminding me. I'll add the spacer plate to my list. Since I won't be needing the NOS bumper guards, I am sure they will help in getting enough money for a trans and spacer plate. -----Original Message----- From: Cobraii976@aol.com To: mustangii@topica.com Date: Wednesday, March 08, 2000 3:56 PM Subject: four speed Hey Tim while your out searching for tranny parts make sure you get the spacer plate the one that has been sitting here for you since November went out in a box today and I'm out of stock on it. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------=_NextPart_000_0131_01BF8917.9A32B210 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000308T210145Z END:VCARD ------=_NextPart_000_0131_01BF8917.9A32B210-- ------------------------------ Date: Wed, 8 Mar 2000 16:05:29 EST From: COBRAII976@aol.com Subject: Re: four speed The ones I made you a killer deal on because we were friends. wish I would have got full price out of those if I knew then what I knew now. I think I would not have discounted them but seeing how I have 10 more fronts and 10 more rears just like that one set did not kill me. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Wed, 8 Mar 2000 16:07:59 EST From: COBRAII976@aol.com Subject: WELL THIS COULD BE MY LAST POST WELL THIS COULD BE THE LAST ONE AFTER TIM PRETTY MUCH THREATENED TO BAN ME. I SEE HE IS GETTING MORE LIKE THE ORG SITE EVERYDAY, I'M SUPRISED THE TWO PRICKS COULD NOT HAVE WORKED TOGETHER, WELL ADIOS. Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Wed, 8 Mar 2000 17:09:59 EST From: COBRAII976@aol.com Subject: taking a poll I need to hear from everyone on this ok lets say you have a ghia and the one quarter is shot the doors are bad but the floors are solid. now the neighbor wants the car for the engine and trans and a guy he works with wants the front sub and the rear for a rod, but you have access to a sub cut from a floorless quarteless POS now do you make a deal on the stuff from the pure scrap car and let someone buy the ghia with not motor or trans so it can be saved, I want everyone's opinion on this. I say you make a deal with the ghia for the parts so the ghia can can be saved MY OPINION, Dave 76 CobraII ADE MustangII New Used Repro parts and Restoration services. ICQ #24507973 AOL IM Cobraii976 MSN Messenger ADEMUSTANGII ADEMUSTANGII@Hotmail.com MustangIIThousand@MustangII.Net ------------------------------ Date: Wed, 8 Mar 2000 17:16:58 EST From: Stang2boy@aol.com Subject: Re: taking a poll I try and save every Decent' II I see, Whether I buy it, Or find some one to buy it, My Mach 1 was in a junk yard at one time, I saved it, Turned out that it had a 8" with locker, best $300 investment I ever made, My opinion is SAVE THE II. Rick Schmidt Rapid City, South Dakota 74 Mach 1, 2.8 4spd, (pullin motor, puttin in the other 74, so I can give it some TLC, Also need to put together good 4spd) 74 Mach 1, 2.8L 4spd, (Parts Car, I found another one) 74 Hatch back 2.8L, auto (putting motor from mach 1, So I can do work to the Mach 1) 75 coupe 2.3L, 4spd(just need to get time to swap motors. Workin on getting Turbo, with 5spd) 77 Cobra (Found 351w for, OHHHHHH joy. Wanna see how many 5.0s i can make cry, Still debating on putting the 302 back in it though, What ever happens happens I guess, Found 5spd for it, Woo Hoo!!!!!!!!!!!) 79 coupe (soon to be 302, auto, or mabe a 351w) 79 hatch back Ghia (Rod Project, Found Cleavland for it, True Rod project:):):) ICQ# 32971047 ------------------------------ Date: Wed, 8 Mar 2000 20:07:34 -0600 From: "Ralph C Stenic" Subject: Re: taking a poll SAVE THE II!!!!! Just one thought on the subject. There is never a car to bad to restore as long as the person doing it has the money and the means to to the work. The II that I am working on needs a front clip but did I send it to the bone yard no. I just found 2 IIs for parts one is in rough shape but has plenty of useable parts the other will be turned in to something special HAHAHAHA. Ralph ----- Original Message ----- From: To: Sent: Wednesday, March 08, 2000 4:17 PM Subject: Re: taking a poll > I try and save every Decent' II I see, Whether I buy it, Or find some one > to buy it, My Mach 1 was in a junk yard at one time, I saved it, Turned > out that it had a 8" with locker, best $300 investment I ever made, My > opinion is SAVE THE II. > > Rick Schmidt > > Rapid City, South Dakota > > > 74 Mach 1, 2.8 4spd, (pullin motor, puttin in the other 74, so I can give it > some TLC, Also need to put together good 4spd) > > 74 Mach 1, 2.8L 4spd, (Parts Car, I found another one) > > 74 Hatch back 2.8L, auto (putting motor from mach 1, So I can do work to the > Mach 1) > > 75 coupe 2.3L, 4spd(just need to get time to swap motors. Workin on getting > Turbo, with 5spd) > > 77 Cobra (Found 351w for, OHHHHHH joy. Wanna see how many 5.0s i can make > cry, Still debating on putting the 302 back in it though, What ever happens > happens I guess, Found 5spd for it, Woo Hoo!!!!!!!!!!!) > > 79 coupe (soon to be 302, auto, or mabe a 351w) > > 79 hatch back Ghia (Rod Project, Found Cleavland for it, True Rod > project:):):) > > ICQ# 32971047 > > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Thu, 09 Mar 2000 01:21:43 GMT From: "tim thompson" Subject: Re: WELL THIS COULD BE MY LAST POST Dude, what's your trip? You've been threatening to leave ever since I got on this list. The last round of crap is exactly why I left the .org list in the first place. If you're gonna do it, JUST DO IT! "Don't let the door hit 'ya where the good Lord split 'ya" Tim >From: Cobraii976@aol.com >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: WELL THIS COULD BE MY LAST POST >Date: Wed, 08 Mar 2000 13:08:09 -0800 > >WELL THIS COULD BE THE LAST ONE AFTER TIM PRETTY MUCH THREATENED TO BAN ME. >I >SEE HE IS GETTING MORE LIKE THE ORG SITE EVERYDAY, I'M SUPRISED THE TWO >PRICKS COULD NOT HAVE WORKED TOGETHER, >WELL ADIOS. > >Dave >76 CobraII >ADE MustangII New Used Repro parts and Restoration services. >ICQ #24507973 >AOL IM Cobraii976 >MSN Messenger ADEMUSTANGII >ADEMUSTANGII@Hotmail.com >MustangIIThousand@MustangII.Net > > > >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com ------------------------------ Date: Wed, 8 Mar 2000 21:02:24 -0500 From: "James Keplinger" Subject: Re: Four Speed Manual question. hey Tim!: If its just a shifting fork problem then write me back privately, we should be able to work something out. Besides I need some parts you just mentioned? Jason Keplinger e-mail: jkepling@gte.net -----Original Message----- From: Timothy M. Grahl To: mustangii@topica.com Date: Wednesday, March 08, 2000 3:56 PM Subject: Re: Four Speed Manual question. >With some of the parts I have left over, I am sure I can find someone who >has them and would be willing to work out a deal. I even got extra parts >with the car that I won't be using. Someone should be in the market for a >used rear spoiler and side louvers. I'll have to put the word out for what >I am looking for and what I have to offer. > > >-----Original Message----- >From: Cobraii976@aol.com >To: mustangii@topica.com >Date: Wednesday, March 08, 2000 3:50 PM >Subject: Re: Four Speed Manual question. > > >300 to fix is not bad if the gears and the forks COULD be bought you better >start looking for a 4 speed. I have parts but alas there not forsale. > > >Dave >76 CobraII >ADE MustangII New Used Repro parts and Restoration services. >ICQ #24507973 >AOL IM Cobraii976 >MSN Messenger ADEMUSTANGII >ADEMUSTANGII@Hotmail.com >MustangIIThousand@MustangII.Net > > > >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 > > > ------------------------------ Date: Wed, 8 Mar 2000 21:13:55 -0500 From: "James Keplinger" Subject: Re: WELL THIS COULD BE MY LAST POST Your not the only one !! I 'm getting damn tired of him whining and bitching. I got on this list to talk about II's with other people that love'm like me. If your going to leave then unsubscribe. -----Original Message----- From: tim thompson To: mustangii@topica.com Date: Wednesday, March 08, 2000 8:22 PM Subject: Re: WELL THIS COULD BE MY LAST POST >Dude, what's your trip? You've been threatening to leave ever since I got on >this list. The last round of crap is exactly why I left the .org list in the >first place. If you're gonna do it, JUST DO IT! > >"Don't let the door hit 'ya where the good Lord split 'ya" >Tim > >>From: Cobraii976@aol.com >>Reply-To: mustangii@topica.com >>To: mustangii@topica.com >>Subject: WELL THIS COULD BE MY LAST POST >>Date: Wed, 08 Mar 2000 13:08:09 -0800 >> >>WELL THIS COULD BE THE LAST ONE AFTER TIM PRETTY MUCH THREATENED TO BAN ME. >>I >>SEE HE IS GETTING MORE LIKE THE ORG SITE EVERYDAY, I'M SUPRISED THE TWO >>PRICKS COULD NOT HAVE WORKED TOGETHER, >>WELL ADIOS. >> >>Dave >>76 CobraII >>ADE MustangII New Used Repro parts and Restoration services. >>ICQ #24507973 >>AOL IM Cobraii976 >>MSN Messenger ADEMUSTANGII >>ADEMUSTANGII@Hotmail.com >>MustangIIThousand@MustangII.Net >> >> >> >>_____________________________________________________________ >>Want to find the best email lists? Check out the Topica 20! >>http://www.topica.com/topica20 > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com > >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 > ------------------------------ Date: Wed, 8 Mar 2000 20:22:33 -0600 (CST) From: "Eric N. Wilkinson" Subject: Re: Four Speed Manual question. II Fans, Guess I'm late on this, but I had my 4-speed completely rebuilt with all new gears for $400. I used the original case and it still pops out of second if I don't physically hold it in though. My approach to this whole thing is that it is nothing exotic. I have a 351W from a truck and a standard 4-speed. The goal is to have a first that you can use and have about 500 RPM between gears and a fourth of 1:1 - that is absolutely standard. Sometimes I believe that we can let a mechanic know we feel our vehicles are far more exotic than they are and the cash register starts ringing. Eric ------------------------------ Date: Wed, 8 Mar 2000 21:33:02 EST From: COBRAII976@aol.com Subject: Re: WELL THIS COULD BE MY LAST POST TIM FUCK YOU LEAVE YOU WON'T HURT MY FEELINGS ------------------------------ Date: Wed, 8 Mar 2000 18:58:21 -0800 From: "Timothy Grahl" Subject: No More Dave has been banned from this list. I WILL NOT tolerate profanity or verbal abuse by ANYONE. This list is for those who sincerely want help with their twos and I will not let it turn into a flaming war. ------------------------------------------------------------ Get your free email at the Mustang II Network http://www.mustangii.net ------------------------------ Date: Wed, 8 Mar 2000 22:03:42 -0800 From: "PHIL L SCHMIDT" Subject: Re: No More amen! ----- Original Message ----- From: "Timothy Grahl" To: Sent: Wednesday, March 08, 2000 6:58 PM Subject: No More > Dave has been banned from this list. I WILL NOT tolerate profanity or verbal abuse by ANYONE. This list is for those who sincerely want help with their twos and I will not let it turn into a flaming war. > > > > > ------------------------------------------------------------ > Get your free email at the Mustang II Network > http://www.mustangii.net > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Thu, 09 Mar 2000 05:23:51 GMT From: "tim thompson" Subject: Re: No More Thanks for keeping it on an even keel. Tim >From: Timothy Grahl >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: No More >Date: Wed, 08 Mar 2000 18:58:24 -0800 > >Dave has been banned from this list. I WILL NOT tolerate profanity or >verbal abuse by ANYONE. This list is for those who sincerely want help >with their twos and I will not let it turn into a flaming war. > > > > >------------------------------------------------------------ >Get your free email at the Mustang II Network >http://www.mustangii.net >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com ------------------------------ End of mustangii@topica.com digest, issue 67 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 20 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 68 Date: Fri, 10 Mar 2000 03:32:34 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Mustang II Exposure By tgrahl@iocenter.net Re: taking a poll By alleneugene@yahoo.com Re: taking a poll By Gr8pmkn1969@aol.com Re: Mustang II Exposure By Gr8pmkn1969@aol.com Re: Frame Rail Mounts By JonandKellie@aol.com Re: Four Speed Manual question. By JonandKellie@aol.com Re: Clutch for 1974 Mustang II By JonandKellie@aol.com Re: No More By JonandKellie@aol.com Re: taking a poll By JonandKellie@aol.com Please remove By billips@amigo.net ------------------------------------------------------------ Date: Thu, 9 Mar 2000 14:45:50 -0500 From: "Timothy M. Grahl" Subject: Mustang II Exposure This is a multi-part message in MIME format. ------=_NextPart_000_008B_01BF89D6.29BA38E0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_008C_01BF89D6.29BBBF80" ------=_NextPart_001_008C_01BF89D6.29BBBF80 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable The Mustang II is getting International exposure. Currently in the = Registry we have entries for England, Canada and most recently Italy. = We also have entries for 29 of the 50 states. The English II is a right hand drive car and I hope to have pictures for = the site soon. Timothy M. Grahl ------=_NextPart_001_008C_01BF89D6.29BBBF80 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable The Mustang II is getting = International=20 exposure. Currently in the Registry we have entries for = England,=20 Canada and most recently Italy. We also have entries for 29 = of the=20 50 states. The English II is a right hand drive car and I hope = to have=20 pictures for the site soon. Timothy M. = Grahl ------=_NextPart_001_008C_01BF89D6.29BBBF80-- ------=_NextPart_000_008B_01BF89D6.29BA38E0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000309T194550Z END:VCARD ------=_NextPart_000_008B_01BF89D6.29BA38E0-- ------------------------------ Date: Thu, 9 Mar 2000 16:57:54 -0800 (PST) From: Allen Hickman Subject: Re: taking a poll Hello: To me if its not a hatchback then its a parts car. --- Cobraii976@aol.com wrote: > I need to hear from everyone on this ok lets say you > have a ghia and the one > quarter is shot the doors are bad but the floors are > solid. now the neighbor > wants the car for the engine and trans and a guy he > works with wants the > front sub and the rear for a rod, but you have > access to a sub cut from a > floorless quarteless POS now do you make a deal on > the stuff from the pure > scrap car and let someone buy the ghia with not > motor or trans so it can be > saved, I want everyone's opinion on this. > I say you make a deal with the ghia for the parts so > the ghia can can be > saved MY OPINION, > > > Dave > 76 CobraII > ADE MustangII New Used Repro parts and Restoration > services. > ICQ #24507973 > AOL IM Cobraii976 > MSN Messenger ADEMUSTANGII > ADEMUSTANGII@Hotmail.com > MustangIIThousand@MustangII.Net > > > > _____________________________________________________________ > Want to find the best email lists? Check out the > Topica 20! > http://www.topica.com/topica20 > __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com ------------------------------ Date: Thu, 9 Mar 2000 21:25:56 EST From: Gr8pmkn1969@aol.com Subject: Re: taking a poll The Ghia is so common, I don't think one less in existence will affect much. I personally have parted out three. I should also mention that I have parted out a few hatchbacks too, even a V-8 Cobra II. Eugene ------------------------------ Date: Thu, 9 Mar 2000 21:27:05 EST From: Gr8pmkn1969@aol.com Subject: Re: Mustang II Exposure DANG, how can I put my car in the registry? Eugene,78 King Cobra ------------------------------ Date: Fri, 10 Mar 2000 00:24:05 EST From: JonandKellie@aol.com Subject: Re: Frame Rail Mounts ralph, to the best of my knowledge, they are EXACTLY the same. ------------------------------ Date: Fri, 10 Mar 2000 00:27:10 EST From: JonandKellie@aol.com Subject: Re: Four Speed Manual question. not a chance, at the very best it's just out of adjustment. But I bet it needs a rebuild. ------------------------------ Date: Fri, 10 Mar 2000 00:30:25 EST From: JonandKellie@aol.com Subject: Re: Clutch for 1974 Mustang II How much and what style of II????? ------------------------------ Date: Fri, 10 Mar 2000 00:49:26 EST From: JonandKellie@aol.com Subject: Re: No More Tim, You suck, and should leave, As for Dave, yes he probably deserved it. ------------------------------ Date: Fri, 10 Mar 2000 00:51:51 EST From: JonandKellie@aol.com Subject: Re: taking a poll WHAT!!!!!!!!!!!!!!!!!!!!!!!!????? Thats the biggest line of crap. Notchbacks are just as cool as Hatchbacks!! I HAVE BOTH!!!!! ------------------------------ Date: Thu, 09 Mar 2000 23:21:30 -0700 From: Dale Billips Subject: Please remove Please remove me from the mailing list. Thank you Dale Billips ------------------------------ End of mustangii@topica.com digest, issue 68 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 19 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 69 Date: Sat, 11 Mar 2000 03:32:11 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: Mustang II Exposure By tgrahl@iocenter.net E-bay toy Coupe!! By jamey_b@nt.midwest-tel.com FW: E-bay toy Coupe!! By jamey_b@nt.midwest-tel.com weatherstripping By sgttrc@epix.net Re: weatherstripping By tim-pam@williams-net.com ------------------------------------------------------------ Date: Fri, 10 Mar 2000 07:50:12 -0500 From: "Timothy M. Grahl" Subject: Re: Mustang II Exposure This is a multi-part message in MIME format. ------=_NextPart_000_0031_01BF8A65.440CC200 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit There is an online form to fill out which can be found at http://www.mustangii.net/registry.htm All information that is not included in the search parameters is kept strictly confidential. -----Original Message----- From: Gr8pmkn1969@aol.com To: mustangii@topica.com Date: Thursday, March 09, 2000 9:26 PM Subject: Re: Mustang II Exposure DANG, how can I put my car in the registry? Eugene,78 King Cobra _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------=_NextPart_000_0031_01BF8A65.440CC200 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000310T125012Z END:VCARD ------=_NextPart_000_0031_01BF8A65.440CC200-- ------------------------------ Date: Fri, 10 Mar 2000 11:49:14 -0600 From: Jamey Brown Subject: E-bay toy Coupe!! I found this on e-bay. I know some of you have been looking for a II coupe car and here is one starting at 4 bucks! http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=280332099 Thank You, Jamey Brown '76 Cobra II http://www.geocities.com/ourcars/cobra.html or check out all of "Our Cars" at: http://www.geocities.com/ourcars ------------------------------ Date: Fri, 10 Mar 2000 11:51:15 -0600 From: Jamey Brown Subject: FW: E-bay toy Coupe!! Or, there is this one... http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=280040278 Thank You, Jamey Brown > -----Original Message----- > From: CenturyTel [mailto:century@midwest-tel.com] On Behalf Of > Jamey Brown > Sent: Friday, March 10, 2000 11:48 AM > To: II Times (E-mail); II-Net (E-mail) > Subject: E-bay toy Coupe!! > > I found this on e-bay. I know some of you have been looking for a II > coupe car and here is one starting at 4 bucks! > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=280332099 > > Thank You, > Jamey Brown > '76 Cobra II > http://www.geocities.com/ourcars/cobra.html > or check out all of "Our Cars" at: > http://www.geocities.com/ourcars > > ------------------------------ Date: Fri, 10 Mar 2000 20:26:23 -0500 From: "Thomas R. Commins" Subject: weatherstripping Where can I find the best price, new or used, for 1978 t-tops and door windows? J.T. ------------------------------ Date: Fri, 10 Mar 2000 23:51:47 -0500 From: "Tim and Pam Allgire" Subject: Re: weatherstripping Check with Year One Restorations.If they can't help you,maybe they can point you in the right direction. -----Original Message----- From: Thomas R. Commins To: mustangii@topica.com Date: Friday, March 10, 2000 8:31 PM Subject: weatherstripping Where can I find the best price, new or used, for 1978 t-tops and door windows? J.T. _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------------------------------ End of mustangii@topica.com digest, issue 69 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 18 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 70 Date: Sun, 12 Mar 2000 03:32:12 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: weatherstripping By rebelmust@aol.com RE: No More By MustangIIThousand@MustangII.Net Tim By MustangIIThousand@MustangII.Net RE: No More By cobra_2_76@yahoo.com Re: Tim By tims302@hotmail.com Sorry Was:Re: Tim By tims302@hotmail.com Re: Tim By blakedianne@cs.com (no subject) By sgttrc@epix.net Re: No More By JonandKellie@aol.com Re: Tim By tim-pam@williams-net.com ------------------------------------------------------------ Date: Sat, 11 Mar 2000 10:24:03 EST From: REBELMUST@aol.com Subject: Re: weatherstripping check with rebel mustang for that t-top weatherstrip they seem to have the largest selection ,decient prices too ------------------------------ Date: Sat, 11 Mar 2000 09:34:45 -0800 From: "Dave Pillsbury" Subject: RE: No More Huh I did not even know I got banned until today. I just figured the list was dead as usuall. Tim you better ban this one you seemed to have forgot it. Dave >To: mustangii@topica.com >From: Timothy Grahl >Subject: No More >Date: Wed, 08 Mar 2000 18:58:24 -0800 >Reply-To: mustangii@topica.com > >Dave has been banned from this list. I WILL NOT tolerate profanity or verbal abuse by ANYONE. This list is for those who sincerely want help with their twos and I will not let it turn into a flaming war. > > > > >------------------------------------------------------------ >Get your free email at the Mustang II Network >http://www.mustangii.net >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 ------------------------------------------------------------ Get your free email at the Mustang II Network http://www.mustangii.net ------------------------------ Date: Sat, 11 Mar 2000 09:41:21 -0800 From: "Dave Pillsbury" Subject: Tim I see you were not man enough to inform me that I was banned. Even the other list had the balls to do that. I guess I was right about you. you have been nuetured. well I tossed my 2 cents in here and by the way Tim I've done more for the MustangII then you could ever think of doing. Your personal attacks of Sergio is not helping the II, ------------------------------------------------------------ Get your free email at the Mustang II Network http://www.mustangii.net ------------------------------ Date: Sat, 11 Mar 2000 12:06:25 -0800 (PST) From: David Wilson Subject: RE: No More You know, Dave's sort of like our Court Jester, jumps right in there and always add's a new humorous twist to our mail! Heck email addresses are easy to get so we might as well sit back and enjoy the entertainment! --- Dave Pillsbury wrote: > Huh I did not even know I got banned until today. I > just figured the list was dead as usuall. Tim you > better ban this one you seemed to have forgot it. > Dave > > > >To: mustangii@topica.com > >From: Timothy Grahl > >Subject: No More > >Date: Wed, 08 Mar 2000 18:58:24 -0800 > >Reply-To: mustangii@topica.com > > > >Dave has been banned from this list. I WILL NOT > tolerate profanity or verbal abuse by ANYONE. This > list is for those who sincerely want help with their > twos and I will not let it turn into a flaming war. > > > > > > > > > >------------------------------------------------------------ > >Get your free email at the Mustang II Network > >http://www.mustangii.net > >_____________________________________________________________ > >Want to find the best email lists? Check out the > Topica 20! > >http://www.topica.com/topica20 > > > > > ------------------------------------------------------------ > Get your free email at the Mustang II Network > http://www.mustangii.net > _____________________________________________________________ > Want to find the best email lists? Check out the > Topica 20! > http://www.topica.com/topica20 > ===== Dave Wilson Cobra_2_76@yahoo.com My Cobra II, hosted by Dan Polk http://www.northpro.net/~polk/mii/ My home page is : http://www.geocities.com/MotorCity/Speedway/7500/index.html alt mail: Dwilson@ftmc.com __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com ------------------------------ Date: Sat, 11 Mar 2000 21:28:39 GMT From: "tim thompson" Subject: Re: Tim What the hell are you talking about? I have never said anything about Sergio. Have you assumed I was someone else? As for not informing you you were banned, I presumed that you had been informed by the list admin. I guess the fact that my name is also Tim is overload for you. Regards, Tim (not Tim Grahl if that's what you think) >From: Dave Pillsbury >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: Tim >Date: Sat, 11 Mar 2000 09:41:25 -0800 > >I see you were not man enough to inform me that I was banned. Even the >other list had the balls to do that. I guess I was right about you. you >have been nuetured. >well I tossed my 2 cents in here and by the way Tim I've done more for the >MustangII then you could ever think of doing. Your personal attacks of >Sergio is not helping the II, > > > > >------------------------------------------------------------ >Get your free email at the Mustang II Network >http://www.mustangii.net >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com ------------------------------ Date: Sat, 11 Mar 2000 21:46:02 GMT From: "tim thompson" Subject: Sorry Was:Re: Tim I apoligise to the list for sending this to the entire list. I foolishly did not check the "reply to" header before sending. Had I known it was for the list, I would have re-addressed it. Tim >From: tim thompson >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: Re: Tim >Date: Sat, 11 Mar 2000 13:28:41 -0800 > > >--- Sponsor's Message -------------------------------------- >Don't let someone else's opinion count more >than yours. Vote. >http://click.topica.com/aaaadBaVxiQnaVzVoia/www.y2vote.org >------------------------------------------------------------ > >What the hell are you talking about? I have never said anything about >Sergio. Have you assumed I was someone else? As for not informing you you >were banned, I presumed that you had been informed by the list admin. I >guess the fact that my name is also Tim is overload for you. > >Regards, >Tim (not Tim Grahl if that's what you think) > > >>From: Dave Pillsbury >>Reply-To: mustangii@topica.com >>To: mustangii@topica.com >>Subject: Tim >>Date: Sat, 11 Mar 2000 09:41:25 -0800 >> >>I see you were not man enough to inform me that I was banned. Even the >>other list had the balls to do that. I guess I was right about you. you >>have been nuetured. >>well I tossed my 2 cents in here and by the way Tim I've done more for the >>MustangII then you could ever think of doing. Your personal attacks of >>Sergio is not helping the II, >> >> >> >> >>------------------------------------------------------------ >>Get your free email at the Mustang II Network >>http://www.mustangii.net >>_____________________________________________________________ >>Want to find the best email lists? Check out the Topica 20! >>http://www.topica.com/topica20 > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com > >_____________________________________________________________ >Want to find the best email lists? Check out the Topica 20! >http://www.topica.com/topica20 ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com ------------------------------ Date: Sat, 11 Mar 2000 18:11:02 EST From: BlakeDianne@cs.com Subject: Re: Tim 1978 cobra two mustang looking for a red dash board excellent condition and i am looking for a driver seat in red excellent condition. Can any one out their help me? Dianne ------------------------------ Date: Sat, 11 Mar 2000 20:50:30 -0500 From: "Thomas R. Commins" Subject: (no subject) Dianne, Sorry I can't help you with the seat but I can with the dash. If finding an exact match is a problem, how about finding a dash in any color and dying it with vinyl, plastic, carpet dye. It worked for me for rear compartment panels. J.T. ------------------------------ Date: Sat, 11 Mar 2000 22:40:00 EST From: JonandKellie@aol.com Subject: Re: No More AAAAAAAAA MMMMMMMM EEEEEEEEEE NNNNNNNNNNN !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ------------------------------ Date: Sat, 11 Mar 2000 23:29:56 -0500 From: "Tim and Pam Allgire" Subject: Re: Tim Are you looking for a padded dash or would you settle for a dash cover ? J.C. Whitney sells those form fitted dash covers that look just like the factory pad but they are made of plastic I do believe.You would have to check to see if they have one for your application. -----Original Message----- From: blakedianne@cs.com To: mustangii@topica.com Date: Saturday, March 11, 2000 6:15 PM Subject: Re: Tim 1978 cobra two mustang looking for a red dash board excellent condition and i am looking for a driver seat in red excellent condition. Can any one out their help me? Dianne _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------------------------------ End of mustangii@topica.com digest, issue 70 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 17 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 71 Date: Mon, 13 Mar 2000 03:32:04 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: Four Speed Manual question. By zstlkr@aol.com vinyl paint or dye By jheemske@infoserve.net 75 Mustang By jwisbean@aol.com Re: 75 Mustang By windmill35@prodigy.net Re: 75 Mustang By tim-pam@williams-net.com ------------------------------------------------------------ Date: Sun, 12 Mar 2000 02:10:29 EST From: ZSTLKR@aol.com Subject: Re: Four Speed Manual question. sounds like bad syncro gear I have access to a 4 gear completefor about 400.00 plus shippin chuck ------------------------------ Date: Sun, 12 Mar 2000 02:08:47 -0800 From: "John Heemskerk" Subject: vinyl paint or dye Lost all the other info on this topic.... What is the best vinyl paint or dye to use. One car needs to be done same colour and the other wants a colour change from white to black??? Make, and where to get it. Thanks John Heemskerk ------------------------------ Date: Sun, 12 Mar 2000 11:08:02 EST From: Jwisbean@aol.com Subject: 75 Mustang I have just bought my first Mustang its a 75 II with a 302 and I love it . Its in great shape but it needs some interior parts, I would like some help on were to find some interior parts . I would like to know how to tell what tranny I have . thanks for all your help to a new mustang lover . It does have the Ghia package . thank you . Jeff ------------------------------ Date: Sun, 12 Mar 2000 11:23:25 -0800 From: "PHIL L SCHMIDT" Subject: Re: 75 Mustang Jeff you have a C4 automatic transmission door code W. Must II Spec Shop ----- Original Message ----- From: To: Sent: Sunday, March 12, 2000 8:08 AM Subject: 75 Mustang > I have just bought my first Mustang its a 75 II with a 302 and I love it . > Its in great shape but it needs some interior parts, I would like some help > on were to find some interior parts . I would like to know how to tell what > tranny I have . thanks for all your help to a new mustang lover . It does > have the Ghia package . thank you . Jeff > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 ------------------------------ Date: Sun, 12 Mar 2000 12:24:51 -0500 From: "Tim and Pam Allgire" Subject: Re: 75 Mustang I don't know the codes--but I would think that you could take it to the nearest Ford dealer & tell him what the code is & he should be able to look it up for you. -----Original Message----- From: jwisbean@aol.com To: mustangii@topica.com Date: Sunday, March 12, 2000 11:12 AM Subject: 75 Mustang I have just bought my first Mustang its a 75 II with a 302 and I love it . Its in great shape but it needs some interior parts, I would like some help on were to find some interior parts . I would like to know how to tell what tranny I have . thanks for all your help to a new mustang lover . It does have the Ghia package . thank you . Jeff _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20 ------------------------------ End of mustangii@topica.com digest, issue 71 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 16 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 72 Date: Tue, 14 Mar 2000 03:32:45 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- E-bay item By jamey_b@nt.midwest-tel.com ------------------------------------------------------------ Date: Mon, 13 Mar 2000 10:52:49 -0600 From: Jamey Brown Subject: E-bay item No picture, but I thought you coupe and Ghia guys may be into this... http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=280774402 Thank You, Jamey Brown '76 Cobra II http://www.geocities.com/ourcars/cobra.html or check out all of "Our Cars" at: http://www.geocities.com/ourcars ------------------------------ End of mustangii@topica.com digest, issue 72 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 15 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 73 Date: Fri, 17 Mar 2000 03:32:44 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: No More silence!!!! By jkepling@gte.net Re: No More silence!!!! By MustangIIThousand@MustangII.Net Help me with numbers By billips@amigo.net Re: No More silence!!!! By RCStenic@prodigy.net Re: No More silence!!!! By rebelmust@aol.com ------------------------------------------------------------ Date: Thu, 16 Mar 2000 21:36:16 -0500 From: "James Keplinger" Subject: Re: No More silence!!!! Where are all of you II lovers ? It's been to quit online, I need help finding 1/2 inch thick wheel spacers anyone know where I can get them? Jason Keplinger ------------------------------ Date: Thu, 16 Mar 2000 19:08:15 -0800 From: "Dave Pillsbury" Subject: Re: No More silence!!!! JC whitney Custom wheel shops Murrays, It will be a hunt but you will find them. and remember to get the longer wheel studs. Dave Banned from list and still answering questions.It's BLOODY MAJIK >To: mustangii@topica.com >From: James Keplinger >Subject: Re: No More silence!!!! >Date: Thu, 16 Mar 2000 18:43:30 -0800 >Reply-To: mustangii@topica.com > > >----Public Service Announcement ---------------------------- >Don't let someone else's opinion count more >than yours. Vote. >http://click.topica.com/aaaadBaVxiQnaVB1aNa/www.y2vote.org >------------------------------------------------------------ > > >Where are all of you II lovers ? It's been to quit online, I need help >finding 1/2 inch thick wheel spacers anyone know where I can get them? > > >Jason Keplinger > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 ------------------------------------------------------------ Get your free email at the Mustang II Network http://www.mustangii.net ------------------------------ Date: Thu, 16 Mar 2000 20:19:57 -0700 From: Dale Billips Subject: Help me with numbers Hello. My name is Dale Billips and I am searching for production numbers for the 77 Mustang II. I have a 77 Mustang II that is painted Bright Saddle Metalic, paint code 8K. The car also has a full white vinyl top. What I am looking for are production numbers for cars that were painted this color. I have never seen another one painted this color. Any information will be greatly appreciated. Thank you. Dale Billips ------------------------------ Date: Thu, 16 Mar 2000 22:37:30 -0600 From: "Ralph C Stenic" Subject: Re: No More silence!!!! Why wheel spacers are dangerous. And not allowed in most classes of racing. You should consider finding the right off set wheel. ----- Original Message ----- From: "James Keplinger" To: Sent: Thursday, March 16, 2000 8:43 PM Subject: Re: No More silence!!!! > > ----Public Service Announcement ---------------------------- > Don't let someone else's opinion count more > than yours. Vote. > http://click.topica.com/aaaadBaVxiQnaVzVoWa/www.y2vote.org > ------------------------------------------------------------ > > > Where are all of you II lovers ? It's been to quit online, I need help > finding 1/2 inch thick wheel spacers anyone know where I can get them? > > > Jason Keplinger > > _________________________________________________________ > Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Fri, 17 Mar 2000 00:57:25 EST From: REBELMUST@aol.com Subject: Re: No More silence!!!! beware when you go to a 1/2 inch spacer (with most rims) you will need to change to longer studs so you have enough threads to bolt lug safely on. why not use 2 1/4 inch spacers, rebel mustangII ------------------------------ End of mustangii@topica.com digest, issue 73 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 14 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 74 Date: Sat, 18 Mar 2000 03:31:57 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: No More silence!!!! By tim-pam@williams-net.com Re: No More silence!!!! By SHST@mis.co.yuma.az.us Remove By MustangIIThousand@MustangII.Net Anti-flame measures. By tgrahl@iocenter.net RE: Anti-flame measures. By jamey_b@nt.midwest-tel.com Re: Anti-flame measures. By tim-pam@williams-net.com ------------------------------------------------------------ Date: Fri, 17 Mar 2000 12:05:35 -0500 From: "Tim and Pam Allgire" Subject: Re: No More silence!!!! My local auto parts store sells the 5-lug variety.Check to see if you can get them from your local auto parts store. -----Original Message----- From: James Keplinger To: mustangii@topica.com Date: Thursday, March 16, 2000 9:48 PM Subject: Re: No More silence!!!! ----Public Service Announcement ---------------------------- Don't let someone else's opinion count more than yours. Vote. http://click.topica.com/aaaadBaVxiQnaVB5fpa/www.y2vote.org ------------------------------------------------------------ Where are all of you II lovers ? It's been to quit online, I need help finding 1/2 inch thick wheel spacers anyone know where I can get them? Jason Keplinger _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Fri, 17 Mar 2000 10:15:16 -0700 From: "Shona Stichal" Subject: Re: No More silence!!!! Well, I'm a Mustang lover, who just happens to own one of the best II's = ever! So anyway, what is the goal here with the wheel spacers? >>> James Keplinger 03/16/00 07:43PM >>> ----Public Service Announcement ---------------------------- Don't let someone else's opinion count more=20 than yours. Vote. http://click.topica.com/aaaadBaVxiQnaVDOHna/www.y2vote.org=20 ------------------------------------------------------------ Where are all of you II lovers ? It's been to quit online, I need help finding 1/2 inch thick wheel spacers anyone know where I can get them? Jason Keplinger _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Fri, 17 Mar 2000 09:41:43 -0800 From: "Dave Pillsbury" Subject: Remove Well I've asked Tim nicely to take my cars off his registry and the Car of the Month down I submitted them and Tim refuses. I suggest to all that have flaming leave now it's about to get warm in here. ------------------------------------------------------------ Get your free email at the Mustang II Network http://www.mustangii.net ------------------------------ Date: Fri, 17 Mar 2000 12:51:16 -0500 From: "Timothy M. Grahl" Subject: Anti-flame measures. This is a multi-part message in MIME format. ------=_NextPart_000_012C_01BF900F.7BC76EC0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_012D_01BF900F.7BC76EC0" ------=_NextPart_001_012D_01BF900F.7BC76EC0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable It appears that we have another irate user who has threatened to flame = the list. As a precaution, I will be screening the messages. Timothy M. Grahl Web Development and E-Commerce Specialist Internet Operations Center 200 Galleria Officentre Suite 109 Southfield, Michigan 48034 tgrahl@iocenter.net 248.204.8806 ------=_NextPart_001_012D_01BF900F.7BC76EC0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable It appears that we have another = irate user who=20 has threatened to flame the list. As a precaution, I will be = screening the messages. Timothy M. Grahl Web Development = and=20 E-Commerce Specialist Internet Operations Center 200 Galleria=20 Officentre Suite 109 Southfield, Michigan 48034 tgrahl@iocenter.net 248.204.88= 06 ------=_NextPart_001_012D_01BF900F.7BC76EC0-- ------=_NextPart_000_012C_01BF900F.7BC76EC0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000317T175116Z END:VCARD ------=_NextPart_000_012C_01BF900F.7BC76EC0-- ------------------------------ From: jamey_b@nt.midwest-tel.com Subject: RE: Anti-flame measures. This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01BF903A.A9BCC180 Content-Type: text/plain; charset="iso-8859-1" It is so sad that Tim has to resort to this and waste his time and energy do to the immaturity of a certain list member. Your personal little grobbles are of NO interest to me, you remind me of my 3 year old daughter with the ways you search for attention, and I'm sure other members feel the same. Tim, Thank you for all of your effort to keep this list focused on the II's. I am disgusted that a group of adults in a list about cars has to be basically baby-sat. Pathetic, don't you agree? Sorry for filling your mailboxes with my thoughts, but I am just sick of this individuals actions, thoughts, and schemes! Thank You, Jamey Brown '76 Cobra II http://www.geocities.com/ourcars/cobra.html or check out all of "Our Cars" at: http://www.geocities.com/ourcars -----Original Message----- From: Timothy M. Grahl [mailto:tgrahl@iocenter.net] Sent: Friday, March 17, 2000 11:52 AM To: mustangii@topica.com Subject: Anti-flame measures. It appears that we have another irate user who has threatened to flame the list. As a precaution, I will be screening the messages. Timothy M. Grahl Web Development and E-Commerce Specialist Internet Operations Center 200 Galleria Officentre Suite 109 Southfield, Michigan 48034 tgrahl@iocenter.net 248.204.8806 ------_=_NextPart_001_01BF903A.A9BCC180 Content-Type: text/html; charset="iso-8859-1" It is so sad that Tim has to resort to this and waste his time and energy do to the immaturity of a certain list member. Your personal little grobbles are of NO interest to me, you remind me of my 3 year old daughter with the ways you search for attention, and I'm sure other members feel the same. Tim, Thank you for all of your effort to keep this list focused on the II's. I am disgusted that a group of adults in a list about cars has to be basically baby-sat. Pathetic, don't you agree? Sorry for filling your mailboxes with my thoughts, but I am just sick of this individuals actions, thoughts, and schemes! Thank You, Jamey Brown '76 Cobra II http://www.geocities.com/ourcars/cobra.html or check out all of "Our Cars" at: http://www.geocities.com/ourcars -----Original Message----- From: Timothy M. Grahl [mailto:tgrahl@iocenter.net] Sent: Friday, March 17, 2000 11:52 AM To: mustangii@topica.com Subject: Anti-flame measures. It appears that we have another irate user who has threatened to flame the list. As a precaution, I will be screening the messages. Timothy M. Grahl Web Development and E-Commerce Specialist Internet Operations Center 200 Galleria Officentre Suite 109 Southfield, Michigan 48034 tgrahl@iocenter.net 248.204.8806 ------_=_NextPart_001_01BF903A.A9BCC180-- ------------------------------ From: tim-pam@williams-net.com Subject: Re: Anti-flame measures. This is a multi-part message in MIME format. ------=_NextPart_000_0036_01BF9013.84E769C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Can't we all just get along????? -----Original Message----- From: Timothy M. Grahl To: mustangii@topica.com Date: Friday, March 17, 2000 12:56 PM Subject: Anti-flame measures. =20 =20 It appears that we have another irate user who has threatened to = flame the list. As a precaution, I will be screening the messages. =20 =20 Timothy M. Grahl Web Development and E-Commerce Specialist Internet Operations Center 200 Galleria Officentre Suite 109 Southfield, Michigan 48034 tgrahl@iocenter.net 248.204.8806 ------=_NextPart_000_0036_01BF9013.84E769C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable HTML//EN"> Can't we all just get = along????? -----Original = Message----- From:=20 Timothy M. Grahl To:= =20 mustangii@topica.com = D= ate:=20 Friday, March 17, 2000 12:56 PM Subject: Anti-flame=20 measures. It appears that we have another = irate user=20 who has threatened to flame the list. As a precaution, I = will be=20 screening the messages. Timothy M. Grahl Web = Development and=20 E-Commerce Specialist Internet Operations Center 200 Galleria=20 Officentre Suite 109 Southfield, Michigan 48034 tgrahl@iocenter.net 248.204.88= 06 ------=_NextPart_000_0036_01BF9013.84E769C0-- ------------------------------ End of mustangii@topica.com digest, issue 74 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 13 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 75 Date: Sun, 19 Mar 2000 03:31:32 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Charlie's Angels Cobra II By vbeauvais@home.com ------------------------------------------------------------ From: vbeauvais@home.com Subject: Charlie's Angels Cobra II Here's a website with pictures of famous TV cars, including the Cobra II from Charlie's Angels. The General Lee is pretty cool too. http://www.javelinamx.com/carstars/tvcar3.htm ------------------------------ End of mustangii@topica.com digest, issue 75 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 12 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 76 Date: Thu, 23 Mar 2000 03:32:42 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- II for sale By jamey_b@nt.midwest-tel.com By tglaser@ttacs.ttu.edu Re: Charlie's Angels Cobra II By jkepling@gte.net Re: By vintees@aol.com sway bars (was RE: ) By vbeauvais@home.com Change of subject By jan_ger@yahoo.com ------------------------------------------------------------ From: jamey_b@nt.midwest-tel.com Subject: II for sale >Picture available at http://www.stormnet.com/~euphoria/mustang > >I'm in Northern California. I still have the car. As far as I know, I'm the >second owner. Bought it with 52K miles on it from a guy that could no longer >drive due to old age. It has 168K on it now. Just got the 2001 tags for it >today. It passed smog no problems a few months ago. It has a v-6 with a c-4 >auto trans. (trans. has about 60,000 miles on it and shifts firmly) Engine >has some new parts on it(lifetime water pump, metal timing gears) engine >still in good condition-doesn't smoke, radiator was rebuilt about 2 years ago, >brand new p/s pump, newer power brake booster, brake calipers and brake >drums. Paint is in good condition exept for some misc. chips here & there. >Tires have good tread on them. Chrome wheels are in excellent condition. Has >some new electrical parts. There are no problems that I know of besides the >brake cylinder may be getting weak(a $30 part) or the brakes might just need >to be bled. I've invested a lot of money in the car but this other project(my >'72 isn't even painted yet, and that was supposed to be done a long time ago. >At this point, I would sell it for $1250 'cause I need the money for college >and a paint job on my '72. Owning two cars is getting too expensive with >insurance and all. Especially when my '72 gets 14-15 mpg. >If you'd like some pictures of it, I have a few. I might be able to get my PC >camera out there some how too. >-Wayne Nice looking II for the price. If anyone is interested, there is an e-mail link from Wayne's web site. Thank You, Jamey Brown ------------------------------ From: tglaser@ttacs.ttu.edu I am looking for a picture of sub frame connectors, for a '77 II, with how to install instructions. where they weld up? And has anyone made a rear sway bar? ------------------------------ From: jkepling@gte.net Subject: Re: Charlie's Angels Cobra II Speaking of websites I found one of good interest! WWW.SHOWCARS-BODYPARTS.COM . Looking at the page I found all the louvers, rear 3-piece spoilers, front spoiler, hood scoop, rear quarter panels and bumpers for the might II's. y'all check it out theres a little bit of everything in this one. Jason Keplinger -----Original Message----- From: vbeauvais@home.com To: mustangii@topica.com Date: Saturday, March 18, 2000 11:03 PM Subject: Charlie's Angels Cobra II > >Here's a website with pictures of famous TV cars, including the Cobra II >from Charlie's Angels. The General Lee is pretty cool too. > > >http://www.javelinamx.com/carstars/tvcar3.htm > > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 > ------------------------------ Date: Wed, 22 Mar 2000 23:47:00 EST From: VINTEES@aol.com Subject: Re: Hi There! On my Cobra II I have installed front & rear sway bars. They were made by Larry Mitchell about 20 years ago. He was (& I think still is president of the AMX club of America). He liked & appreciated the II's but was never a HUGE fan because of the "low" horsepower output at the time. ANYWAY, I installed the bars front & rear & ended up litterally tearing out the floor pan on the rear bar, (when driving it) so I made two steel plates to mount the "stab"bar brackets, one on the top surface of the floor & one on the bottom surface of the floor pan to mount the brackets to. After doing that, I haven't really driven the car that much, but I know they will hold. I haven't "talked" to Larry for many years, but I understand, through other AMX owners he is still "around", & actually "just" living down the road from me. If this sounds like something you are interested in let me know, I'll try to get him in touch with you. Rick. ------------------------------ Date: Wed, 22 Mar 2000 21:43:28 -0800 From: "Vincent Beauvais (home)" Subject: sway bars (was RE: ) Why not just use the factory front and rear sway bars? You could get them from one of the vendors at MustangII.net or you may be able to find them at an autowrecker. Vince -----Original Message----- From: vintees@aol.com [mailto:vintees@aol.com] Sent: Wednesday, March 22, 2000 8:48 PM To: mustangii@topica.com Subject: Re: Hi There! On my Cobra II I have installed front & rear sway bars. They were made by Larry Mitchell about 20 years ago. He was (& I think still is president of the AMX club of America). He liked & appreciated the II's but was never a HUGE fan because of the "low" horsepower output at the time. ANYWAY, I installed the bars front & rear & ended up litterally tearing out the floor pan on the rear bar, (when driving it) so I made two steel plates to mount the "stab"bar brackets, one on the top surface of the floor & one on the bottom surface of the floor pan to mount the brackets to. After doing that, I haven't really driven the car that much, but I know they will hold. I haven't "talked" to Larry for many years, but I understand, through other AMX owners he is still "around", & actually "just" living down the road from me. If this sounds like something you are interested in let me know, I'll try to get him in touch with you. Rick. _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Thu, 23 Mar 2000 01:28:56 -0800 (PST) From: Janet Gerhardt Subject: Change of subject --0-1365180540-953803736=:12490 Content-Type: text/plain; charset=us-ascii I was wondering if anyone might happen to know where I could purchase a "boot" for an automatic on-the-floor gear shift. I have a 1978 Ghia Mustang II. If anyone could help me out I would greatly appreciate it. Thanks!! Janet Gerhardt --------------------------------- Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. --0-1365180540-953803736=:12490 Content-Type: text/html; charset=us-ascii

I was wondering if anyone might happen to know where I could purchase a "boot" for an automatic on-the-floor gear shift. I have a 1978 Ghia Mustang II. If anyone could help me out I would greatly appreciate it. Thanks!!

Janet Gerhardt


Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger. --0-1365180540-953803736=:12490-- ------------------------------ End of mustangii@topica.com digest, issue 76 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 11 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 77 Date: Fri, 24 Mar 2000 03:32:27 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- tv show cars By blakedianne@cs.com RE: tv show cars By vbeauvais@home.com Re: sway bars (was RE: ) By vintees@aol.com Re: sway bars (was RE: ) By rebelmust@aol.com Short question By tglaser@ttacs.ttu.edu Re: sway bars (was RE: ) By tglaser@ttacs.ttu.edu ------------------------------------------------------------ Date: Thu, 23 Mar 2000 19:37:01 EST From: BlakeDianne@cs.com Subject: tv show cars does anybody have that web site that was mentioned that featured tv show cars? thanks ------------------------------ Date: Thu, 23 Mar 2000 18:30:34 -0800 From: "Vincent Beauvais (home)" Subject: RE: tv show cars http://www.javelinamx.com/carstars/tvcar3.htm -----Original Message----- From: blakedianne@cs.com [mailto:blakedianne@cs.com] Sent: Thursday, March 23, 2000 4:37 PM To: mustangii@topica.com Subject: tv show cars does anybody have that web site that was mentioned that featured tv show cars? thanks _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Fri, 24 Mar 2000 00:00:29 EST From: VINTEES@aol.com Subject: Re: sway bars (was RE: ) Well, that's a good question! But back in '81 or what ever it was, I guess I didn't realize that FORD made them, or maybe I did, I really can't remember. I do know that the ones Larry made for me are bigger in diameter, & supposedly stronger? Anyway, if FORD made them & e-salvage yards have them, why don't you get a set from there? (or maybe I mis-read your e-mail). Let me know..... Rick. ------------------------------ Date: Fri, 24 Mar 2000 00:13:30 EST From: REBELMUST@aol.com Subject: Re: sway bars (was RE: ) we had a call from someone who had inquired about a hood scoop for a cobra this person called our shop to buy the scoop but was cut off on our recorder. can this person please call us again as we have the scoop ready to ship to you. thanks,rebel mustang-----(562)694-8770 ------------------------------ Date: Fri, 24 Mar 2000 03:05:25 -0600 From: Trent Glaser Subject: Short question This is a multi-part message in MIME format. ------=_NextPart_000_0020_01BF953D.CCF33DA0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I would like to get some feedback, and a kick in the ass, from you Mustang II lovers out there on this dilemma I am faced with. I would like to build a drag car. My dream would be a Fastback Mustang II, but I am tempted and being pressured to buy a Cutlass,with the duel bolt pattern tranny, and a Chevy 400 small block, with a steal crank, dome top pistons and a bad ass set of ported and polished heads with Manley one piece valves, roller rockers and a roller lifters all for a grand total of $1100. It is a good friend that is selling the engine. He built the engine for a 4x4 Chevy blazer, I have seen the engine smoke four 44 inch Super Swampers, and I have been in the truck when he punched it doing 70mph it got squirrelly in the rear with an automatic tranny. Maybe I am ignorant I was quite impressed with the performance. This engine would go in the back seat of the Cutlass with a few minor modifications and lots of KY Jelly. However my dream would be to rebuild a high output Ford possibly a big block. Are there any suggestions for the Ford Engine I am looking for? Stroked 351 or 302 ? Note I would like to pull the front wheels. Oh there is one more question. For my 77 II What do I need for duel exhaust and headers? Go with tuneable muffler for clearance problem? I would like a nice tone not obnoxious with minial cab noise. Thank you all Trent Glaser P.S. Thanks everyone for the valuable information on the sway bars. ------=_NextPart_000_0020_01BF953D.CCF33DA0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I would like to get some feedback, and a kick in the = ass, from=20 you Mustang II lovers out there on this dilemma I am faced with. I = would=20 like to build a drag car. My dream would be a Fastback Mustang II, but I = am=20 tempted and being pressured to buy a Cutlass,with the duel bolt = pattern=20 tranny, and a Chevy 400 small block, with a steal crank, dome top = pistons and a=20 bad ass set of ported and polished heads with Manley one piece valves, = roller=20 rockers and a roller lifters all for a grand total of $1100. = It is a=20 good friend that is selling the engine. He built the engine = for a 4x4=20 Chevy blazer, I have seen the engine smoke four 44 = inch=20 Super Swampers, and I have been in the truck when he punched it doing=20 70mph it got squirrelly in the rear with an automatic tranny. = Maybe I=20 am ignorant I was quite impressed with the performance. This engine = would=20 go in the back seat of the Cutlass with a few minor modifications = and lots=20 of KY Jelly. However my dream would be to rebuild a high output = Ford=20 possibly a big block. Are there any suggestions for the Ford Engine = I am=20 looking for? Stroked 351 or 302 ? Note I would like to pull the = front=20 wheels. Oh there is one more question. For my 77 = II What do=20 I need for duel exhaust and headers? Go with tuneable muffler for = clearance=20 problem? I would like a nice tone not obnoxious with minial cab=20 noise. Thank you all Trent Glaser P.S. Thanks everyone for the valuable = information on the=20 sway bars. ------=_NextPart_000_0020_01BF953D.CCF33DA0-- ------------------------------ Date: Fri, 24 Mar 2000 03:14:40 -0600 From: Trent Glaser Subject: Re: sway bars (was RE: ) Rick You didn't miss read my question. Did the sway bars make a big difference? Trent ----- Original Message ----- From: To: Sent: Thursday, March 23, 2000 11:05 PM Subject: Re: sway bars (was RE: ) Well, that's a good question! But back in '81 or what ever it was, I guess I didn't realize that FORD made them, or maybe I did, I really can't remember. I do know that the ones Larry made for me are bigger in diameter, & supposedly stronger? Anyway, if FORD made them & e-salvage yards have them, why don't you get a set from there? (or maybe I mis-read your e-mail). Let me know..... Rick. _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ End of mustangii@topica.com digest, issue 77 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 11 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 77 Date: Fri, 24 Mar 2000 03:32:27 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- tv show cars By blakedianne@cs.com RE: tv show cars By vbeauvais@home.com Re: sway bars (was RE: ) By vintees@aol.com Re: sway bars (was RE: ) By rebelmust@aol.com Short question By tglaser@ttacs.ttu.edu Re: sway bars (was RE: ) By tglaser@ttacs.ttu.edu ------------------------------------------------------------ Date: Thu, 23 Mar 2000 19:37:01 EST From: BlakeDianne@cs.com Subject: tv show cars does anybody have that web site that was mentioned that featured tv show cars? thanks ------------------------------ Date: Thu, 23 Mar 2000 18:30:34 -0800 From: "Vincent Beauvais (home)" Subject: RE: tv show cars http://www.javelinamx.com/carstars/tvcar3.htm -----Original Message----- From: blakedianne@cs.com [mailto:blakedianne@cs.com] Sent: Thursday, March 23, 2000 4:37 PM To: mustangii@topica.com Subject: tv show cars does anybody have that web site that was mentioned that featured tv show cars? thanks _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Fri, 24 Mar 2000 00:00:29 EST From: VINTEES@aol.com Subject: Re: sway bars (was RE: ) Well, that's a good question! But back in '81 or what ever it was, I guess I didn't realize that FORD made them, or maybe I did, I really can't remember. I do know that the ones Larry made for me are bigger in diameter, & supposedly stronger? Anyway, if FORD made them & e-salvage yards have them, why don't you get a set from there? (or maybe I mis-read your e-mail). Let me know..... Rick. ------------------------------ Date: Fri, 24 Mar 2000 00:13:30 EST From: REBELMUST@aol.com Subject: Re: sway bars (was RE: ) we had a call from someone who had inquired about a hood scoop for a cobra this person called our shop to buy the scoop but was cut off on our recorder. can this person please call us again as we have the scoop ready to ship to you. thanks,rebel mustang-----(562)694-8770 ------------------------------ Date: Fri, 24 Mar 2000 03:05:25 -0600 From: Trent Glaser Subject: Short question This is a multi-part message in MIME format. ------=_NextPart_000_0020_01BF953D.CCF33DA0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I would like to get some feedback, and a kick in the ass, from you Mustang II lovers out there on this dilemma I am faced with. I would like to build a drag car. My dream would be a Fastback Mustang II, but I am tempted and being pressured to buy a Cutlass,with the duel bolt pattern tranny, and a Chevy 400 small block, with a steal crank, dome top pistons and a bad ass set of ported and polished heads with Manley one piece valves, roller rockers and a roller lifters all for a grand total of $1100. It is a good friend that is selling the engine. He built the engine for a 4x4 Chevy blazer, I have seen the engine smoke four 44 inch Super Swampers, and I have been in the truck when he punched it doing 70mph it got squirrelly in the rear with an automatic tranny. Maybe I am ignorant I was quite impressed with the performance. This engine would go in the back seat of the Cutlass with a few minor modifications and lots of KY Jelly. However my dream would be to rebuild a high output Ford possibly a big block. Are there any suggestions for the Ford Engine I am looking for? Stroked 351 or 302 ? Note I would like to pull the front wheels. Oh there is one more question. For my 77 II What do I need for duel exhaust and headers? Go with tuneable muffler for clearance problem? I would like a nice tone not obnoxious with minial cab noise. Thank you all Trent Glaser P.S. Thanks everyone for the valuable information on the sway bars. ------=_NextPart_000_0020_01BF953D.CCF33DA0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I would like to get some feedback, and a kick in the = ass, from=20 you Mustang II lovers out there on this dilemma I am faced with. I = would=20 like to build a drag car. My dream would be a Fastback Mustang II, but I = am=20 tempted and being pressured to buy a Cutlass,with the duel bolt = pattern=20 tranny, and a Chevy 400 small block, with a steal crank, dome top = pistons and a=20 bad ass set of ported and polished heads with Manley one piece valves, = roller=20 rockers and a roller lifters all for a grand total of $1100. = It is a=20 good friend that is selling the engine. He built the engine = for a 4x4=20 Chevy blazer, I have seen the engine smoke four 44 = inch=20 Super Swampers, and I have been in the truck when he punched it doing=20 70mph it got squirrelly in the rear with an automatic tranny. = Maybe I=20 am ignorant I was quite impressed with the performance. This engine = would=20 go in the back seat of the Cutlass with a few minor modifications = and lots=20 of KY Jelly. However my dream would be to rebuild a high output = Ford=20 possibly a big block. Are there any suggestions for the Ford Engine = I am=20 looking for? Stroked 351 or 302 ? Note I would like to pull the = front=20 wheels. Oh there is one more question. For my 77 = II What do=20 I need for duel exhaust and headers? Go with tuneable muffler for = clearance=20 problem? I would like a nice tone not obnoxious with minial cab=20 noise. Thank you all Trent Glaser P.S. Thanks everyone for the valuable = information on the=20 sway bars. ------=_NextPart_000_0020_01BF953D.CCF33DA0-- ------------------------------ Date: Fri, 24 Mar 2000 03:14:40 -0600 From: Trent Glaser Subject: Re: sway bars (was RE: ) Rick You didn't miss read my question. Did the sway bars make a big difference? Trent ----- Original Message ----- From: To: Sent: Thursday, March 23, 2000 11:05 PM Subject: Re: sway bars (was RE: ) Well, that's a good question! But back in '81 or what ever it was, I guess I didn't realize that FORD made them, or maybe I did, I really can't remember. I do know that the ones Larry made for me are bigger in diameter, & supposedly stronger? Anyway, if FORD made them & e-salvage yards have them, why don't you get a set from there? (or maybe I mis-read your e-mail). Let me know..... Rick. _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ End of mustangii@topica.com digest, issue 77 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 9 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 79 Date: Sun, 26 Mar 2000 03:31:20 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Cobra II decals By billips@amigo.net Re: Short question By jkepling@gte.net hey look at this web page ! By atgreen1@yahoo.com Re: Short question By Fordman66@webtv.net Re: Network News By zstlkr@aol.com ------------------------------------------------------------ Date: Sat, 25-Mar-2000 13:39:36 GMT From: Subject: Cobra II decals Hey all you Cobra II fans! I was surfing through E-bay last night and found a brand new set of Cobra II decals for a 78 Cobra II. The description said it was a NOS set that was found at a Ford delership. It is an entire set and the color is orange. It includes the big letters on the side and the hood, top, and deck lid. Minimum bid was 100.00 and there were no bids on it yet. Good luck and happy II. Dale Billips ------------------------------ Date: Sat, 25 Mar 2000 11:54:30 -0500 From: "James Keplinger" Subject: Re: Short question The 302 sounds good or maybe even a strocker they've come way down in price over the years. As for the 352 or 390 the massive blocks and heads are to heavy for a race considering today's technology and strocker kits. I mean really who wants to build a 1000 pound motor ( 390 ) when you can build a 600 pound motor with 426 cu. in. (351W strocker).I have a 302 in mine that is daily driven that produces 465 peak hp @ 7,000 rpm's and 415 ft/lbs. of torque @ 5;500 I did the head work and assembled it my self but it was relatively inexpensive! Jason Keplinger -----Original Message----- From: stang2boy@aol.com To: mustangii@topica.com Date: Saturday, March 25, 2000 12:35 AM Subject: Re: Short question Trent, If I were you, i would build a 302, Cuz they have a light botom end, and rap really high, Or a FE seriese motor, like a 352 or 390 Rick _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Sat, 25 Mar 2000 14:17:05 -0800 (PST) From: keith labeau Subject: hey look at this web page ! hey go here ples. http;//go.to/brookenterprise __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com ------------------------------ Date: Sat, 25 Mar 2000 17:38:39 -0600 (CST) From: Fordman66@webtv.net (Ford Mann) Subject: Re: Short question The 390 does Not way 1000 pounds!! The 390 weighs less then a 429 or 460. And the 351W doesn't way 600 pounds. There are plenty of aftermarket parts for the 390. There is even a company that produces Aluminum cross-bolt main FE Blocks. You can get aluminum heads and intakes for them as well. A FE with cross-bolt mains is nearly indestructible. You can build a 390 that weighs the same as a 351W if not less. But the 390 is more at home in a truck then a small passenger car just because of it's Size not it's weight. The FE series was the original big block and deserves a little respect. They are very good engines. And how many people run 7000 rpms with V8's daily? Each motor has their place FE will out pull a small block any day, that's because it's built for torque. Small blocks are wonderful motors and fairly cheap to build, but that doesn't mean FE's are junk. Well that's my 2 cents worth, sorry if I rambled on. Ted. ------------------------------ Date: Sat, 25 Mar 2000 21:47:33 EST From: ZSTLKR@aol.com Subject: Re: Network News In a message dated 3/24/00 3:13:56 PM Central Standard Time, tgrahl@iocenter.net writes: << www.mustangii.net/photo.htm >> hey tim if i can get a picture of it i have a J/L mustang II race car simular to the Monroe Racer I will send to you Chuck ------------------------------ End of mustangii@topica.com digest, issue 79 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 8 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 80 Date: Mon, 27 Mar 2000 03:35:17 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: Short question By jkepling@gte.net Re: rear spioler By jkepling@gte.net Re: Short question By BADBRY67@AOL.COM Re: Short question By BADBRY67@AOL.COM Re: rear spioler By BADBRY67@AOL.COM Re: Short question By Fordman66@webtv.net Re: rear spioler By RCStenic@prodigy.net Re: Short question By Gr8pmkn1969@aol.com Re: Four Speed Manual question. By 63tbird@vvm.com ------------------------------------------------------------ Date: Sun, 26 Mar 2000 18:35:06 -0500 From: "James Keplinger" Subject: Re: Short question Sorry if you misinturpiated my reply. I was not putting down the FE blocks by any means, simply saying that for the money and weight difference a small block strocker would be better choice in my book. Most people ( including Myself ) can't afford aluminum big blocks plus the performance parts to go in them and not to mention all the fabricating to put a FE motor in a II. Thats the reason for my choice reply to that question. I had a 428 in a 64 Galaxy 500 two door hardtop and I was very pleased with it. Jason -----Original Message----- From: Ford Mann To: mustangii@topica.com Date: Saturday, March 25, 2000 6:38 PM Subject: Re: Short question The 390 does Not way 1000 pounds!! The 390 weighs less then a 429 or 460. And the 351W doesn't way 600 pounds. There are plenty of aftermarket parts for the 390. There is even a company that produces Aluminum cross-bolt main FE Blocks. You can get aluminum heads and intakes for them as well. A FE with cross-bolt mains is nearly indestructible. You can build a 390 that weighs the same as a 351W if not less. But the 390 is more at home in a truck then a small passenger car just because of it's Size not it's weight. The FE series was the original big block and deserves a little respect. They are very good engines. And how many people run 7000 rpms with V8's daily? Each motor has their place FE will out pull a small block any day, that's because it's built for torque. Small blocks are wonderful motors and fairly cheap to build, but that doesn't mean FE's are junk. Well that's my 2 cents worth, sorry if I rambled on. Ted. _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Sun, 26 Mar 2000 18:48:21 -0500 From: "James Keplinger" Subject: Re: rear spioler Does anyone out there have a driver side corner spoiler piece for sale I was smacked in the back side and it was broke off. -----Original Message----- From: keith labeau To: Erna ; diana haddix ; dibugkids hall/haddix ; Irfan ; Janet ; jimdawn ; justin ; Keith ; James Keplinger ; leeruth ; Lena ; Margrit ; Maureen ; Michael ; Moray ; carl simm ; jerry smith ; Jerry J Smith ; mike smith ; ? ; ? ; ? ; ? ; ? ; ? ; ? ; ? ; Adi ; Agus ; Andy ; Anita ; Antony ; Arun ; april bales ; balinda ; Betty ; Bob ; Calvin ; Chandhu ; Charlie ; Darryl ; Dawn ; Didier ; Dien ; cruella@netgenie.com ; eneubec1@visteon.com ; sherrylk@lca.com ; stang2boy@aol.com ; rculp1999@aol.com ; reenietay@aol.com ; mustangii@topica.com ; rgibbs@usit.net ; vivee73@aol.com ; kd61165@aol.com ; bonlad@aol.com ; dymented@juno.com ; jts@foxberry.net ; cicloggermom@hotmail.com ; billips@amigo.net ; tstauder@wwd.net ; woolyweb@aol.com ; bucababy@aol.com ; mrdezi@aol.com ; apandrew@juno.com ; jcm_bodeen@yahoo.com ; ? ; ? ; ? ; ? Date: Saturday, March 25, 2000 5:08 PM Subject: hey look at this web page ! > hey go here ples. http;//go.to/brookenterprise > >__________________________________________________ >Do You Yahoo!? >Talk to your friends online with Yahoo! Messenger. >http://im.yahoo.com >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Sun, 26 Mar 2000 20:05:34 EST From: BADBRY67@aol.com Subject: Re: Short question If the 390 is so good, why did all the 396 camaro's smoke the Mustangs. Don't get me wrong I love Fords and own 6 of them, including a 5.0 cobra II, a 67 Mustang with a 351w, a 73 Mach with a 351c, not to mention a 69 cougar conv. with a 351w. The 390 was lacking in 1/4 mile performance, that's why they went to the 428cj, and yes i know parts are from a 390. Don't get me wrong either,I don't want to start a fight, just state this mans opinion. Brian Rada ------------------------------ Date: Sun, 26 Mar 2000 20:06:37 EST From: BADBRY67@aol.com Subject: Re: Short question I totally agree with Jason! ------------------------------ Date: Sun, 26 Mar 2000 20:08:12 EST From: BADBRY67@aol.com Subject: Re: rear spioler Tony Branda has one, big catch though they charged me 50.00 for a right hand one with broken studs. It was used and pretty much abused, i feel i got ripped off! ------------------------------ Date: Sun, 26 Mar 2000 19:40:51 -0600 (CST) From: Fordman66@webtv.net (Ford Mann) Subject: Re: Short question I didn't say anything about drag racing a FE. I said they are good torque motors. But with the right knowledge the can be made to haul A@@. It doesn't take much. And if you want to start comparing cars I seem to recall the camaro wasting the stock 5.0L mustang II cobra of the same age. And the 390 and 428cj and scj share very few parts. They just share the basic design of the motor. I love the ford small block, but from the factory almost all engines are just a base to build from for performance enthusiast. If you are into performance no stock engine will be good enough, there is always an urge to push the envelope and build more power. And I do agree that an FE engine does not belong in a Musang II unless you do it strictly for the wow factor. But in a larger vehicle the FE is awesome with some very simple mods. If you've even seen, heard or drove a r-code early to mid 60's Galaxie with the 427 you will know what I mean. And the Galaxie is Not a light car. Basically what is boils down to is personal preference. I think all ford engines have a great amount of potential, you just have to know how to uncork them. Ted. ------------------------------ Date: Sun, 26 Mar 2000 20:59:33 -0600 From: "Ralph C Stenic" Subject: Re: rear spioler Yes Check with Dave at ADE mustang. ----- Original Message ----- From: "James Keplinger" To: Sent: Sunday, March 26, 2000 5:56 PM Subject: Re: rear spioler > Does anyone out there have a driver side corner spoiler piece for sale I > was smacked in the back side and it was broke off. > -----Original Message----- > From: keith labeau > To: Erna ; diana haddix ; dibugkids > hall/haddix ; Irfan ; Janet > ; jimdawn ; justin ; > Keith ; James Keplinger ; leeruth > ; Lena ; Margrit > ; Maureen ; Michael > ; Moray ; carl simm > ; jerry smith ; Jerry J Smith > ; mike smith ; ? > ; ? ; ? ; > ? ; ? ; ? ; ? > ; ? ; Adi > ; Agus ; Andy > ; Anita ; Antony > ; Arun ; april bales > ; balinda ; Betty > ; Bob ; Calvin > ; Chandhu ; Charlie > ; Darryl ; Dawn > ; Didier ; Dien > ; cruella@netgenie.com ; > eneubec1@visteon.com ; sherrylk@lca.com > ; stang2boy@aol.com ; rculp1999@aol.com > ; reenietay@aol.com ; > mustangii@topica.com ; rgibbs@usit.net > ; vivee73@aol.com ; kd61165@aol.com > ; bonlad@aol.com ; dymented@juno.com > ; jts@foxberry.net ; > cicloggermom@hotmail.com ; billips@amigo.net > ; tstauder@wwd.net ; woolyweb@aol.com > ; bucababy@aol.com ; mrdezi@aol.com > ; apandrew@juno.com ; > jcm_bodeen@yahoo.com ; ? ; ? > ; ? ; ? > Date: Saturday, March 25, 2000 5:08 PM > Subject: hey look at this web page ! > > > > hey go here ples. http;//go.to/brookenterprise > > > >__________________________________________________ > >Do You Yahoo!? > >Talk to your friends online with Yahoo! Messenger. > >http://im.yahoo.com > >_________________________________________________________ > >Enlighten your in-box. http://www.topica.com/t/15 > > _________________________________________________________ > Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Sun, 26 Mar 2000 21:01:23 EST From: Gr8pmkn1969@aol.com Subject: Re: Short question I can only speak for myself, but I think the 390 in the mustang was more of an experiment than a performance statement. Ford wanted to see how the car did on the street with a big block. The 390 was already a proven engine and is still unstoppable for a balls out tuff truck motor. Eugene Riggs ------------------------------ Date: Sun, 26 Mar 2000 22:07:19 -0600 From: "Brian A. Smith" <63tbird@vvm.com> Subject: Re: Four Speed Manual question. Do ya still have the rear spoiler and window louvers? B 77-1/2 MII ----- Original Message ----- From: "Timothy M. Grahl" To: Sent: Wednesday, March 08, 2000 2:55 PM Subject: Re: Four Speed Manual question. > With some of the parts I have left over, I am sure I can find someone who > has them and would be willing to work out a deal. I even got extra parts > with the car that I won't be using. Someone should be in the market for a > used rear spoiler and side louvers. I'll have to put the word out for what > I am looking for and what I have to offer. > > > -----Original Message----- > From: Cobraii976@aol.com > To: mustangii@topica.com > Date: Wednesday, March 08, 2000 3:50 PM > Subject: Re: Four Speed Manual question. > > > 300 to fix is not bad if the gears and the forks COULD be bought you better > start looking for a 4 speed. I have parts but alas there not forsale. > > > Dave > 76 CobraII > ADE MustangII New Used Repro parts and Restoration services. > ICQ #24507973 > AOL IM Cobraii976 > MSN Messenger ADEMUSTANGII > ADEMUSTANGII@Hotmail.com > MustangIIThousand@MustangII.Net > > > > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 > > > ------------------------------ End of mustangii@topica.com digest, issue 80 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 8 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 80 Date: Mon, 27 Mar 2000 03:35:17 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: Short question By jkepling@gte.net Re: rear spioler By jkepling@gte.net Re: Short question By BADBRY67@AOL.COM Re: Short question By BADBRY67@AOL.COM Re: rear spioler By BADBRY67@AOL.COM Re: Short question By Fordman66@webtv.net Re: rear spioler By RCStenic@prodigy.net Re: Short question By Gr8pmkn1969@aol.com Re: Four Speed Manual question. By 63tbird@vvm.com ------------------------------------------------------------ Date: Sun, 26 Mar 2000 18:35:06 -0500 From: "James Keplinger" Subject: Re: Short question Sorry if you misinturpiated my reply. I was not putting down the FE blocks by any means, simply saying that for the money and weight difference a small block strocker would be better choice in my book. Most people ( including Myself ) can't afford aluminum big blocks plus the performance parts to go in them and not to mention all the fabricating to put a FE motor in a II. Thats the reason for my choice reply to that question. I had a 428 in a 64 Galaxy 500 two door hardtop and I was very pleased with it. Jason -----Original Message----- From: Ford Mann To: mustangii@topica.com Date: Saturday, March 25, 2000 6:38 PM Subject: Re: Short question The 390 does Not way 1000 pounds!! The 390 weighs less then a 429 or 460. And the 351W doesn't way 600 pounds. There are plenty of aftermarket parts for the 390. There is even a company that produces Aluminum cross-bolt main FE Blocks. You can get aluminum heads and intakes for them as well. A FE with cross-bolt mains is nearly indestructible. You can build a 390 that weighs the same as a 351W if not less. But the 390 is more at home in a truck then a small passenger car just because of it's Size not it's weight. The FE series was the original big block and deserves a little respect. They are very good engines. And how many people run 7000 rpms with V8's daily? Each motor has their place FE will out pull a small block any day, that's because it's built for torque. Small blocks are wonderful motors and fairly cheap to build, but that doesn't mean FE's are junk. Well that's my 2 cents worth, sorry if I rambled on. Ted. _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Sun, 26 Mar 2000 18:48:21 -0500 From: "James Keplinger" Subject: Re: rear spioler Does anyone out there have a driver side corner spoiler piece for sale I was smacked in the back side and it was broke off. -----Original Message----- From: keith labeau To: Erna ; diana haddix ; dibugkids hall/haddix ; Irfan ; Janet ; jimdawn ; justin ; Keith ; James Keplinger ; leeruth ; Lena ; Margrit ; Maureen ; Michael ; Moray ; carl simm ; jerry smith ; Jerry J Smith ; mike smith ; ? ; ? ; ? ; ? ; ? ; ? ; ? ; ? ; Adi ; Agus ; Andy ; Anita ; Antony ; Arun ; april bales ; balinda ; Betty ; Bob ; Calvin ; Chandhu ; Charlie ; Darryl ; Dawn ; Didier ; Dien ; cruella@netgenie.com ; eneubec1@visteon.com ; sherrylk@lca.com ; stang2boy@aol.com ; rculp1999@aol.com ; reenietay@aol.com ; mustangii@topica.com ; rgibbs@usit.net ; vivee73@aol.com ; kd61165@aol.com ; bonlad@aol.com ; dymented@juno.com ; jts@foxberry.net ; cicloggermom@hotmail.com ; billips@amigo.net ; tstauder@wwd.net ; woolyweb@aol.com ; bucababy@aol.com ; mrdezi@aol.com ; apandrew@juno.com ; jcm_bodeen@yahoo.com ; ? ; ? ; ? ; ? Date: Saturday, March 25, 2000 5:08 PM Subject: hey look at this web page ! > hey go here ples. http;//go.to/brookenterprise > >__________________________________________________ >Do You Yahoo!? >Talk to your friends online with Yahoo! Messenger. >http://im.yahoo.com >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Sun, 26 Mar 2000 20:05:34 EST From: BADBRY67@aol.com Subject: Re: Short question If the 390 is so good, why did all the 396 camaro's smoke the Mustangs. Don't get me wrong I love Fords and own 6 of them, including a 5.0 cobra II, a 67 Mustang with a 351w, a 73 Mach with a 351c, not to mention a 69 cougar conv. with a 351w. The 390 was lacking in 1/4 mile performance, that's why they went to the 428cj, and yes i know parts are from a 390. Don't get me wrong either,I don't want to start a fight, just state this mans opinion. Brian Rada ------------------------------ Date: Sun, 26 Mar 2000 20:06:37 EST From: BADBRY67@aol.com Subject: Re: Short question I totally agree with Jason! ------------------------------ Date: Sun, 26 Mar 2000 20:08:12 EST From: BADBRY67@aol.com Subject: Re: rear spioler Tony Branda has one, big catch though they charged me 50.00 for a right hand one with broken studs. It was used and pretty much abused, i feel i got ripped off! ------------------------------ Date: Sun, 26 Mar 2000 19:40:51 -0600 (CST) From: Fordman66@webtv.net (Ford Mann) Subject: Re: Short question I didn't say anything about drag racing a FE. I said they are good torque motors. But with the right knowledge the can be made to haul A@@. It doesn't take much. And if you want to start comparing cars I seem to recall the camaro wasting the stock 5.0L mustang II cobra of the same age. And the 390 and 428cj and scj share very few parts. They just share the basic design of the motor. I love the ford small block, but from the factory almost all engines are just a base to build from for performance enthusiast. If you are into performance no stock engine will be good enough, there is always an urge to push the envelope and build more power. And I do agree that an FE engine does not belong in a Musang II unless you do it strictly for the wow factor. But in a larger vehicle the FE is awesome with some very simple mods. If you've even seen, heard or drove a r-code early to mid 60's Galaxie with the 427 you will know what I mean. And the Galaxie is Not a light car. Basically what is boils down to is personal preference. I think all ford engines have a great amount of potential, you just have to know how to uncork them. Ted. ------------------------------ Date: Sun, 26 Mar 2000 20:59:33 -0600 From: "Ralph C Stenic" Subject: Re: rear spioler Yes Check with Dave at ADE mustang. ----- Original Message ----- From: "James Keplinger" To: Sent: Sunday, March 26, 2000 5:56 PM Subject: Re: rear spioler > Does anyone out there have a driver side corner spoiler piece for sale I > was smacked in the back side and it was broke off. > -----Original Message----- > From: keith labeau > To: Erna ; diana haddix ; dibugkids > hall/haddix ; Irfan ; Janet > ; jimdawn ; justin ; > Keith ; James Keplinger ; leeruth > ; Lena ; Margrit > ; Maureen ; Michael > ; Moray ; carl simm > ; jerry smith ; Jerry J Smith > ; mike smith ; ? > ; ? ; ? ; > ? ; ? ; ? ; ? > ; ? ; Adi > ; Agus ; Andy > ; Anita ; Antony > ; Arun ; april bales > ; balinda ; Betty > ; Bob ; Calvin > ; Chandhu ; Charlie > ; Darryl ; Dawn > ; Didier ; Dien > ; cruella@netgenie.com ; > eneubec1@visteon.com ; sherrylk@lca.com > ; stang2boy@aol.com ; rculp1999@aol.com > ; reenietay@aol.com ; > mustangii@topica.com ; rgibbs@usit.net > ; vivee73@aol.com ; kd61165@aol.com > ; bonlad@aol.com ; dymented@juno.com > ; jts@foxberry.net ; > cicloggermom@hotmail.com ; billips@amigo.net > ; tstauder@wwd.net ; woolyweb@aol.com > ; bucababy@aol.com ; mrdezi@aol.com > ; apandrew@juno.com ; > jcm_bodeen@yahoo.com ; ? ; ? > ; ? ; ? > Date: Saturday, March 25, 2000 5:08 PM > Subject: hey look at this web page ! > > > > hey go here ples. http;//go.to/brookenterprise > > > >__________________________________________________ > >Do You Yahoo!? > >Talk to your friends online with Yahoo! Messenger. > >http://im.yahoo.com > >_________________________________________________________ > >Enlighten your in-box. http://www.topica.com/t/15 > > _________________________________________________________ > Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Sun, 26 Mar 2000 21:01:23 EST From: Gr8pmkn1969@aol.com Subject: Re: Short question I can only speak for myself, but I think the 390 in the mustang was more of an experiment than a performance statement. Ford wanted to see how the car did on the street with a big block. The 390 was already a proven engine and is still unstoppable for a balls out tuff truck motor. Eugene Riggs ------------------------------ Date: Sun, 26 Mar 2000 22:07:19 -0600 From: "Brian A. Smith" <63tbird@vvm.com> Subject: Re: Four Speed Manual question. Do ya still have the rear spoiler and window louvers? B 77-1/2 MII ----- Original Message ----- From: "Timothy M. Grahl" To: Sent: Wednesday, March 08, 2000 2:55 PM Subject: Re: Four Speed Manual question. > With some of the parts I have left over, I am sure I can find someone who > has them and would be willing to work out a deal. I even got extra parts > with the car that I won't be using. Someone should be in the market for a > used rear spoiler and side louvers. I'll have to put the word out for what > I am looking for and what I have to offer. > > > -----Original Message----- > From: Cobraii976@aol.com > To: mustangii@topica.com > Date: Wednesday, March 08, 2000 3:50 PM > Subject: Re: Four Speed Manual question. > > > 300 to fix is not bad if the gears and the forks COULD be bought you better > start looking for a 4 speed. I have parts but alas there not forsale. > > > Dave > 76 CobraII > ADE MustangII New Used Repro parts and Restoration services. > ICQ #24507973 > AOL IM Cobraii976 > MSN Messenger ADEMUSTANGII > ADEMUSTANGII@Hotmail.com > MustangIIThousand@MustangII.Net > > > > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 > > > ------------------------------ End of mustangii@topica.com digest, issue 80 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 6 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 82 Date: Wed, 29 Mar 2000 03:32:23 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- The truth By tgrahl@iocenter.net parts By jgering@apci.net Re: parts By SHST@mis.co.yuma.az.us Re: Four Speed Manual question. By rebelmust@aol.com Re: [MustangIIMA] The truth By rheschel@bright.net ------------------------------------------------------------ Date: Tue, 28 Mar 2000 08:54:39 -0500 From: "Timothy M. Grahl" Subject: The truth This is a multi-part message in MIME format. ------=_NextPart_000_012B_01BF9893.404177B0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_012C_01BF9893.404177B0" ------=_NextPart_001_012C_01BF9893.404177B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable This message is intended for the entire Mustang II mailing list. Many = of you know who I am. Many of you also know who Dave Pillsbury is. = Some of you believe we are one in the same. That is not the case. =20 I am not above public apologies nor am I any better than the rest of the = Mustang II world. I am merely trying to restore the reputation that our = cars have been given. When I "take on a project", I devote all my time = and effort to that project. =20 To anyone that feels that I have hurt them in any way, I am sorry. =20 I do want everyone to know that the accusations that have surfaced on = StangNet are untrue. This "war" that seperated the Net and Org sites = was unnecessary yet not caused by me directly. The person who posted = to the Network list as Sergio is well known for that type of tactics. = That post came from an AOL account which I do not have. I have never = "smurffed" any sites nor do I even know how that is done. There is alot = behind the scenes which Sergio and various members of the list can = verify that have not surfaced. There have been threats of bodily harm = to various members including myself which I feel is totally uncalled = for. I am surprised that Mark was not aware of some of the threats to = him. These threats did not come from me. Nor did the racial slurs = which have circulated through various emails. =20 I hope that in the future, all of the Mustang II members, no matter = which mailing lists they read or which site they visit, can get together = for the betterment of the Mustang II. I have spoken to Sergio = concerning the sharing of resources between the sites and was told that = there are still bad feelings towards me and the Mustang II Network. I = hope that these feelings will be eased in the coming months. I am = doing my best to prevent any further problems between the two sites. = As was done in the past on the Org list, I have banned Dave from the = Network list and asked that he not make any derogatory or flaming = remarks to any guestbooks, forums or lists on any sites. =20 To set the record straight, I alone am the person behind the Mustang II = Network. Any email that does not come directly from me is not = representative of the Mustang II Network or the Mustang II Parts = distribution. I have nothing to hide nor do I wish anyone any harm. Again, I apologize for anything that may have hurt anyone. I hope the = Mustang II Organization, the Mustang II Network and all of the = individual Mustang II sites continue to prosper and grow and make the = Mustang II "the right car, at the right time" again. Sincerely, Timothy M. Grahl Webmaster - Mustang II Network March 28, 2000 ------=_NextPart_001_012C_01BF9893.404177B0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable This message is intended for the = entire Mustang=20 II mailing list. Many of you know who I am. Many of = you also=20 know who Dave Pillsbury is. Some of you believe we are one in the=20 same. That is not the case. I am not above public apologies nor am I any better = than the=20 rest of the Mustang II world. I am merely trying to restore the = reputation=20 that our cars have been given. When I "take on a = project", I=20 devote all my time and effort to that project. To anyone that feels that I have hurt them in any = way, I am=20 sorry. I do want everyone to know that the accusations that = have=20 surfaced on StangNet are untrue. This "war" that = seperated the=20 Net and Org sites was unnecessary yet not caused by me = directly. The=20 person who posted to the Network list as Sergio is well known for that = type of=20 tactics. That post came from an AOL account which I do not = have. I=20 have never "smurffed" any sites nor do I even know how that is = done. There is alot behind the scenes which Sergio and various = members of=20 the list can verify that have not surfaced. There have been = threats of=20 bodily harm to various members including myself which I feel is totally = uncalled=20 for. I am surprised that Mark was not aware of some of the threats = to=20 him. These threats did not come from me. Nor did the = racial=20 slurs which have circulated through various emails. = I hope that in the future, all of the Mustang II = members, no=20 matter which mailing lists they read or which site they visit, can get = together=20 for the betterment of the Mustang II. I have spoken to = Sergio=20 concerning the sharing of resources between the sites and was told that = there=20 are still bad feelings towards me and the Mustang II Network. I = hope that=20 these feelings will be eased in the coming months. I am = doing my=20 best to prevent any further problems between the two sites. = As was=20 done in the past on the Org list, I have banned Dave from the Network = list and=20 asked that he not make any derogatory or flaming remarks to any = guestbooks,=20 forums or lists on any sites. To set the record straight, I alone am the = person behind=20 the Mustang II Network. Any email that does not come directly from = me is=20 not representative of the Mustang II Network or the Mustang II Parts=20 distribution. I have nothing to hide nor do I wish anyone any=20 harm. Again, I apologize for anything that may have hurt=20 anyone. I hope the Mustang II Organization, the Mustang II Network = and all=20 of the individual Mustang II sites continue to prosper and grow and make = the=20 Mustang II "the right car, at the right time" = again. Sincerely, Timothy M. Grahl Webmaster - = Mustang II=20 Network March 28, = 2000 ------=_NextPart_001_012C_01BF9893.404177B0-- ------=_NextPart_000_012B_01BF9893.404177B0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000328T135439Z END:VCARD ------=_NextPart_000_012B_01BF9893.404177B0-- ------------------------------ Date: Tue, 28 Mar 2000 15:18:51 -0600 From: "Jeff Gering" Subject: parts This is a multi-part message in MIME format. ------=_NextPart_000_002A_01BF98C8.EC0B2DE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have a pair of reproduction side spats for a king cobra for sale if = interested e-mail me and make offer . ------=_NextPart_000_002A_01BF98C8.EC0B2DE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have a pair of = reproduction side spats=20 for a king cobra for sale if interested e-mail me and make offer=20 . ------=_NextPart_000_002A_01BF98C8.EC0B2DE0-- ------------------------------ Date: Tue, 28 Mar 2000 15:15:01 -0700 From: "Shona Stichal" Subject: Re: parts Those are for the back fenders, right? How about $50.00? >>> Jeff Gering 03/28/00 02:16PM >>> I have a pair of reproduction side spats for a king cobra for sale if = interested e-mail me and make offer . ------------------------------ Date: Tue, 28 Mar 2000 22:19:10 EST From: REBELMUST@aol.com Subject: Re: Four Speed Manual question. yes we still have rear spoiler and side loovers REBEL MUSTANG ii ------------------------------ Date: Tue, 28 Mar 2000 23:30:27 -0500 From: Alba & Mark CC: mustangii@topica.com Subject: Re: [MustangIIMA] The truth > "Timothy M. Grahl" wrote: > > From: "Timothy M. Grahl" > > This message is intended for the entire Mustang II mailing list. Dave P.s post to stangnet: http://forums.stangnet.com/bbb/Forum15/HTML/000267.html My reply: http://www.bright.net/~rheschel/orgnetcom/ As for the rest of your post, Tim, I find it like the threats: below further comment. -- Mark & Alba. mailto:rheschel@bright.net ------------------------------ End of mustangii@topica.com digest, issue 82 Message: 5 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 83 Date: Thu, 30 Mar 2000 03:32:12 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: Parted out By tgrahl@iocenter.net Re: Parted out By tgrahl@iocenter.net Re: Four Speed Manual question. By tgrahl@iocenter.net Re: The truth By Tspence32@hotmail.com Re: The truth By tgrahl@iocenter.net Re: The truth By tgrahl@iocenter.net help By circlejerk@nirvanafan.com Re: help By SHST@mis.co.yuma.az.us Re: help By tgrahl@iocenter.net fiber hoods anybody? By circlejerk@nirvanafan.com Re: fiber hoods anybody? By shaft_m@hotmail.com RE: fiber hoods anybody? By ebudy@karta.com Re: Parted out By billips@amigo.net Grille By Fordman66@webtv.net RE: Parted out By tgrahl@iocenter.net Re: help By tim-pam@williams-net.com ------------------------------------------------------------ Date: Wed, 29 Mar 2000 09:20:35 -0500 From: "Timothy M. Grahl" Subject: Re: Parted out This is a multi-part message in MIME format. ------=_NextPart_000_00CC_01BF9960.0A536190 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit The ground effects, front spoiler is missing. sorry Tim -----Original Message----- From: Shona Stichal To: billips@amigo.net ; mustangii@topica.com Date: Monday, March 27, 2000 12:14 PM Subject: Re: Parted out Re. the '77 Cobra II, do you have the front valance/any ground effects? Let me know $ if available. Thanks! >>> Dale Billips 03/27/00 07:55AM >>> If you have a drivers side sun visor and a console that is in good shape, let me know. I might be interested if the price is right. Dale Billips > "Timothy M. Grahl" wrote: > > I have stripped the 77 Ghia due to the extensive rust on the body > panels. The engine and trans has been put into a 65 Mustang. The > interior is Chamois Vinyl and is in great shape. Email me if you need > any chamois interior parts. > > Also, I have run across a 77 Cobra II, black on black. No engine, no > trans, no floor and extensive rust. I will be stripping the interior > and some exterior parts in the next couple of weeks. Some of the > interior is spoken for but email me with want lists. > > > Timothy M. Grahl _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------=_NextPart_000_00CC_01BF9960.0A536190 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000329T142035Z END:VCARD ------=_NextPart_000_00CC_01BF9960.0A536190-- ------------------------------ Date: Wed, 29 Mar 2000 09:22:09 -0500 From: "Timothy M. Grahl" Subject: Re: Parted out This is a multi-part message in MIME format. ------=_NextPart_000_00E8_01BF9960.426DB760 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Which color? The chamois or black? Neither has the plastic pins but those can be ordered somewhere. Tim -----Original Message----- From: Dale Billips To: mustangii@topica.com Date: Monday, March 27, 2000 9:56 AM Subject: Re: Parted out If you have a drivers side sun visor and a console that is in good shape, let me know. I might be interested if the price is right. Dale Billips > "Timothy M. Grahl" wrote: > > I have stripped the 77 Ghia due to the extensive rust on the body > panels. The engine and trans has been put into a 65 Mustang. The > interior is Chamois Vinyl and is in great shape. Email me if you need > any chamois interior parts. > > Also, I have run across a 77 Cobra II, black on black. No engine, no > trans, no floor and extensive rust. I will be stripping the interior > and some exterior parts in the next couple of weeks. Some of the > interior is spoken for but email me with want lists. > > > Timothy M. Grahl _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------=_NextPart_000_00E8_01BF9960.426DB760 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000329T142209Z END:VCARD ------=_NextPart_000_00E8_01BF9960.426DB760-- ------------------------------ Date: Wed, 29 Mar 2000 09:22:58 -0500 From: "Timothy M. Grahl" Subject: Re: Four Speed Manual question. This is a multi-part message in MIME format. ------=_NextPart_000_00F5_01BF9960.5F657CE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Are you talking about the rear window louvers or side window louvers? Tim -----Original Message----- From: Brian A. Smith <63tbird@vvm.com> To: mustangii@topica.com Date: Sunday, March 26, 2000 10:53 PM Subject: Re: Four Speed Manual question. Do ya still have the rear spoiler and window louvers? B 77-1/2 MII ----- Original Message ----- From: "Timothy M. Grahl" To: Sent: Wednesday, March 08, 2000 2:55 PM Subject: Re: Four Speed Manual question. > With some of the parts I have left over, I am sure I can find someone who > has them and would be willing to work out a deal. I even got extra parts > with the car that I won't be using. Someone should be in the market for a > used rear spoiler and side louvers. I'll have to put the word out for what > I am looking for and what I have to offer. > > > -----Original Message----- > From: Cobraii976@aol.com > To: mustangii@topica.com > Date: Wednesday, March 08, 2000 3:50 PM > Subject: Re: Four Speed Manual question. > > > 300 to fix is not bad if the gears and the forks COULD be bought you better > start looking for a 4 speed. I have parts but alas there not forsale. > > > Dave > 76 CobraII > ADE MustangII New Used Repro parts and Restoration services. > ICQ #24507973 > AOL IM Cobraii976 > MSN Messenger ADEMUSTANGII > ADEMUSTANGII@Hotmail.com > MustangIIThousand@MustangII.Net > > > > _____________________________________________________________ > Want to find the best email lists? Check out the Topica 20! > http://www.topica.com/topica20 > > > _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------=_NextPart_000_00F5_01BF9960.5F657CE0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000329T142258Z END:VCARD ------=_NextPart_000_00F5_01BF9960.5F657CE0-- ------------------------------ Date: Wed, 29 Mar 2000 11:57:01 EST From: "Tom Spencer" Subject: Re: The truth Mr Grahl apperently could not tell the truth to save his life. I sit here and read an instant Message conversation between Gimmit (Grahl) and Cobraii976 (Pillsbury). I will paraphrase this as I see that over 100 Instant Message conversations between the two of them will be made public. this is my favorite and it goes something like this P: hey G: what's up? P: what's going on with the site G: well the guy i work with is humpty dumpty. P: what???? G: someone posted to both guestbooks today. And used fake names. p: what are you talking about? G: go look at the Org guestbook I took ours out already. P: ok P: So who left that? G: guy next to me he has a bunch of phony e-mail addresses. P: I see that's pretty cool I though we were going to leave org alone. G: we are that was just for fun. G: just like the other day when we smurfed the org site. P: what the hell is a smurfed? G: remember when org went offline the otherday? P: yeah G: We did that. P: that's cool might as well do it somemore. G: There to stupid to figure it out, but it is ilegal. P: well fuck em Now I won't go any further this will get to be read in it's entire IM conversation, Tim Grahl has been a liar since day one. Do not trust this man do not buy anything from him. and do not sell him anything. Tim is the type of guy to puy a used part and sue the guy he got it from. >From: "Timothy M. Grahl" >Reply-To: mustangii@topica.com >To: MustangIIMA@onelist.com, mustangii@topica.com >Subject: The truth >Date: Tue, 28 Mar 2000 05:56:05 -0800 > >This message is intended for the entire Mustang II mailing list. Many of >you know who I am. Many of you also know who Dave Pillsbury is. Some of >you believe we are one in the same. That is not the case. > >I am not above public apologies nor am I any better than the rest of the >Mustang II world. I am merely trying to restore the reputation that our >cars have been given. When I "take on a project", I devote all my time and >effort to that project. > >To anyone that feels that I have hurt them in any way, I am sorry. > >I do want everyone to know that the accusations that have surfaced on >StangNet are untrue. This "war" that seperated the Net and Org sites was >unnecessary yet not caused by me directly. The person who posted to the >Network list as Sergio is well known for that type of tactics. That post >came from an AOL account which I do not have. I have never "smurffed" any >sites nor do I even know how that is done. There is alot behind the scenes >which Sergio and various members of the list can verify that have not >surfaced. There have been threats of bodily harm to various members >including myself which I feel is totally uncalled for. I am surprised that >Mark was not aware of some of the threats to him. These threats did not >come from me. Nor did the racial slurs which have circulated through >various emails. > >I hope that in the future, all of the Mustang II members, no matter which >mailing lists they read or which site they visit, can get together for the >betterment of the Mustang II. I have spoken to Sergio concerning the >sharing of resources between the sites and was told that there are still >bad feelings towards me and the Mustang II Network. I hope that these >feelings will be eased in the coming months. I am doing my best to >prevent any further problems between the two sites. As was done in the >past on the Org list, I have banned Dave from the Network list and asked >that he not make any derogatory or flaming remarks to any guestbooks, >forums or lists on any sites. > >To set the record straight, I alone am the person behind the Mustang II >Network. Any email that does not come directly from me is not >representative of the Mustang II Network or the Mustang II Parts >distribution. I have nothing to hide nor do I wish anyone any harm. > >Again, I apologize for anything that may have hurt anyone. I hope the >Mustang II Organization, the Mustang II Network and all of the individual >Mustang II sites continue to prosper and grow and make the Mustang II "the >right car, at the right time" again. > > >Sincerely, >Timothy M. Grahl >Webmaster - Mustang II Network > >March 28, 2000 ><< TimothyM.Grahl.vcf >> ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com ------------------------------ Date: Wed, 29 Mar 2000 12:00:34 -0500 From: "Timothy M. Grahl" Subject: Re: The truth This is a multi-part message in MIME format. ------=_NextPart_000_015D_01BF9976.6386C2F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Just as a side note, Tom Spencer is an alias for Dave Pillsbury and the IM is a fabricated message. Great reading but never happened. -----Original Message----- From: Tom Spencer To: mustangii@topica.com Date: Wednesday, March 29, 2000 11:56 AM Subject: Re: The truth >Mr Grahl apperently could not tell the truth to save his life. I sit here >and read an instant Message conversation between Gimmit (Grahl) and >Cobraii976 (Pillsbury). I will paraphrase this as I see that over 100 >Instant Message conversations between the two of them will be made public. >this is my favorite and it goes something like this >P: hey >G: what's up? >P: what's going on with the site >G: well the guy i work with is humpty dumpty. >P: what???? >G: someone posted to both guestbooks today. And used fake names. >p: what are you talking about? >G: go look at the Org guestbook I took ours out already. >P: ok >P: So who left that? >G: guy next to me he has a bunch of phony e-mail addresses. >P: I see that's pretty cool I though we were going to leave org alone. >G: we are that was just for fun. >G: just like the other day when we smurfed the org site. >P: what the hell is a smurfed? >G: remember when org went offline the otherday? >P: yeah >G: We did that. >P: that's cool might as well do it somemore. >G: There to stupid to figure it out, but it is ilegal. >P: well fuck em > >Now I won't go any further this will get to be read in it's entire IM >conversation, Tim Grahl has been a liar since day one. Do not trust this man >do not buy anything from him. and do not sell him anything. Tim is the type >of guy to puy a used part and sue the guy he got it from. > > >>From: "Timothy M. Grahl" >>Reply-To: mustangii@topica.com >>To: MustangIIMA@onelist.com, mustangii@topica.com >>Subject: The truth >>Date: Tue, 28 Mar 2000 05:56:05 -0800 >> >>This message is intended for the entire Mustang II mailing list. Many of >>you know who I am. Many of you also know who Dave Pillsbury is. Some of >>you believe we are one in the same. That is not the case. >> >>I am not above public apologies nor am I any better than the rest of the >>Mustang II world. I am merely trying to restore the reputation that our >>cars have been given. When I "take on a project", I devote all my time and >>effort to that project. >> >>To anyone that feels that I have hurt them in any way, I am sorry. >> >>I do want everyone to know that the accusations that have surfaced on >>StangNet are untrue. This "war" that seperated the Net and Org sites was >>unnecessary yet not caused by me directly. The person who posted to the >>Network list as Sergio is well known for that type of tactics. That post >>came from an AOL account which I do not have. I have never "smurffed" any >>sites nor do I even know how that is done. There is alot behind the scenes >>which Sergio and various members of the list can verify that have not >>surfaced. There have been threats of bodily harm to various members >>including myself which I feel is totally uncalled for. I am surprised that >>Mark was not aware of some of the threats to him. These threats did not >>come from me. Nor did the racial slurs which have circulated through >>various emails. >> >>I hope that in the future, all of the Mustang II members, no matter which >>mailing lists they read or which site they visit, can get together for the >>betterment of the Mustang II. I have spoken to Sergio concerning the >>sharing of resources between the sites and was told that there are still >>bad feelings towards me and the Mustang II Network. I hope that these >>feelings will be eased in the coming months. I am doing my best to >>prevent any further problems between the two sites. As was done in the >>past on the Org list, I have banned Dave from the Network list and asked >>that he not make any derogatory or flaming remarks to any guestbooks, >>forums or lists on any sites. >> >>To set the record straight, I alone am the person behind the Mustang II >>Network. Any email that does not come directly from me is not >>representative of the Mustang II Network or the Mustang II Parts >>distribution. I have nothing to hide nor do I wish anyone any harm. >> >>Again, I apologize for anything that may have hurt anyone. I hope the >>Mustang II Organization, the Mustang II Network and all of the individual >>Mustang II sites continue to prosper and grow and make the Mustang II "the >>right car, at the right time" again. >> >> >>Sincerely, >>Timothy M. Grahl >>Webmaster - Mustang II Network >> >>March 28, 2000 >><< TimothyM.Grahl.vcf >> > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 > > ------=_NextPart_000_015D_01BF9976.6386C2F0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000329T170034Z END:VCARD ------=_NextPart_000_015D_01BF9976.6386C2F0-- ------------------------------ Date: Wed, 29 Mar 2000 12:18:17 -0500 From: "Timothy M. Grahl" Subject: Re: The truth This is a multi-part message in MIME format. ------=_NextPart_000_0166_01BF9978.DD0571B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sorry, just as a follow-up.. As you can see from the message below, it is loaded with spelling errors even in the areas that are supposed to be me. Although this is not proof in itself, anyone that is familiar with me knows that I am a stickler for spelling. I know how to spell "illegal" and to use the correct form of "too" versus "to". As for buying and selling of parts, I have bought and sold numerous items on Ebay as well as being an antique dealer for over 15 years. If you have an questions concerning my business ethics, I can provide numerous references to back up my claims. My Ebay ID is gimmit and the feedback will speak for itself. Since I do know that Tom Spencer is actually Dave Pillsbury, I suggest that you look carefully at any messages that come from that email address. -----Original Message----- From: Tom Spencer To: mustangii@topica.com Date: Wednesday, March 29, 2000 11:56 AM Subject: Re: The truth >Mr Grahl apperently could not tell the truth to save his life. I sit here >and read an instant Message conversation between Gimmit (Grahl) and >Cobraii976 (Pillsbury). I will paraphrase this as I see that over 100 >Instant Message conversations between the two of them will be made public. >this is my favorite and it goes something like this >P: hey >G: what's up? >P: what's going on with the site >G: well the guy i work with is humpty dumpty. >P: what???? >G: someone posted to both guestbooks today. And used fake names. >p: what are you talking about? >G: go look at the Org guestbook I took ours out already. >P: ok >P: So who left that? >G: guy next to me he has a bunch of phony e-mail addresses. >P: I see that's pretty cool I though we were going to leave org alone. >G: we are that was just for fun. >G: just like the other day when we smurfed the org site. >P: what the hell is a smurfed? >G: remember when org went offline the otherday? >P: yeah >G: We did that. >P: that's cool might as well do it somemore. >G: There to stupid to figure it out, but it is ilegal. >P: well fuck em > >Now I won't go any further this will get to be read in it's entire IM >conversation, Tim Grahl has been a liar since day one. Do not trust this man >do not buy anything from him. and do not sell him anything. Tim is the type >of guy to puy a used part and sue the guy he got it from. > > >>From: "Timothy M. Grahl" >>Reply-To: mustangii@topica.com >>To: MustangIIMA@onelist.com, mustangii@topica.com >>Subject: The truth >>Date: Tue, 28 Mar 2000 05:56:05 -0800 >> >>This message is intended for the entire Mustang II mailing list. Many of >>you know who I am. Many of you also know who Dave Pillsbury is. Some of >>you believe we are one in the same. That is not the case. >> >>I am not above public apologies nor am I any better than the rest of the >>Mustang II world. I am merely trying to restore the reputation that our >>cars have been given. When I "take on a project", I devote all my time and >>effort to that project. >> >>To anyone that feels that I have hurt them in any way, I am sorry. >> >>I do want everyone to know that the accusations that have surfaced on >>StangNet are untrue. This "war" that seperated the Net and Org sites was >>unnecessary yet not caused by me directly. The person who posted to the >>Network list as Sergio is well known for that type of tactics. That post >>came from an AOL account which I do not have. I have never "smurffed" any >>sites nor do I even know how that is done. There is alot behind the scenes >>which Sergio and various members of the list can verify that have not >>surfaced. There have been threats of bodily harm to various members >>including myself which I feel is totally uncalled for. I am surprised that >>Mark was not aware of some of the threats to him. These threats did not >>come from me. Nor did the racial slurs which have circulated through >>various emails. >> >>I hope that in the future, all of the Mustang II members, no matter which >>mailing lists they read or which site they visit, can get together for the >>betterment of the Mustang II. I have spoken to Sergio concerning the >>sharing of resources between the sites and was told that there are still >>bad feelings towards me and the Mustang II Network. I hope that these >>feelings will be eased in the coming months. I am doing my best to >>prevent any further problems between the two sites. As was done in the >>past on the Org list, I have banned Dave from the Network list and asked >>that he not make any derogatory or flaming remarks to any guestbooks, >>forums or lists on any sites. >> >>To set the record straight, I alone am the person behind the Mustang II >>Network. Any email that does not come directly from me is not >>representative of the Mustang II Network or the Mustang II Parts >>distribution. I have nothing to hide nor do I wish anyone any harm. >> >>Again, I apologize for anything that may have hurt anyone. I hope the >>Mustang II Organization, the Mustang II Network and all of the individual >>Mustang II sites continue to prosper and grow and make the Mustang II "the >>right car, at the right time" again. >> >> >>Sincerely, >>Timothy M. Grahl >>Webmaster - Mustang II Network >> >>March 28, 2000 >><< TimothyM.Grahl.vcf >> > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 > > ------=_NextPart_000_0166_01BF9978.DD0571B0 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000329T171817Z END:VCARD ------=_NextPart_000_0166_01BF9978.DD0571B0-- ------------------------------ Date: Wed, 29 Mar 2000 11:24:24 -0600 From: "CIRCLE" Subject: help im new here and am wondering how to post messages to the whole mustang II crew here i think this is only going to one person if so could you please tell me how it is done i am just another mustang II enthusiast looking to buy sell trade and talk with other stang II enthusiasts please help Donnie ---------------------------------------------- _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com ------------------------------ Date: Wed, 29 Mar 2000 10:23:28 -0700 From: "Shona Stichal" Subject: Re: help I got it! >>> CIRCLE 03/29/00 10:19AM >>> im new here and am wondering how to post messages to the whole mustang II crew here i think this is only going to one person if so could you please tell me how it is done i am just another mustang II enthusiast looking to buy sell trade and talk with other stang II enthusiasts=20 please help Donnie ---------------------------------------------- _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com=20 _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Wed, 29 Mar 2000 12:25:24 -0500 From: "Timothy M. Grahl" Subject: Re: help This is a multi-part message in MIME format. ------=_NextPart_000_0171_01BF9979.DBDEAF80 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Your email has already been circulated to the entire list. The email address mustangii@topica.com is the correct address. -----Original Message----- From: CIRCLE To: mustangii@topica.com Date: Wednesday, March 29, 2000 12:18 PM Subject: help >im new here and am wondering how to post messages to the whole mustang II >crew here i think this is only going to one person if so could you please >tell me how it is done i am just another mustang II enthusiast looking to >buy sell trade and talk with other stang II enthusiasts >please help > >Donnie >---------------------------------------------- > > >_____________________________________________ >Free email with personality! Over 200 domains! >http://www.MyOwnEmail.com > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 > > ------=_NextPart_000_0171_01BF9979.DBDEAF80 Content-Type: text/x-vcard; name="Timothy M. Grahl.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Timothy M. Grahl.vcf" BEGIN:VCARD VERSION:2.1 N:Grahl;Timothy;M. FN:Timothy M. Grahl ORG:Internet Operations Center;Web Development TITLE:Web Development and E-Commerce Specialist TEL;WORK;VOICE:248.204.8806 TEL;HOME;VOICE:313.533.1280 TEL;HOME;FAX:313.537.3536 ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;200 Galleria = Officentre=3D0D=3D0ASuite 109;Southfield;Michigan;48240;USA LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:200 Galleria = Officentre=3D0D=3D0ASuite 109=3D0D=3D0ASouthfield, Michigan = 48240=3D0D=3D =3D0AUSA ADR;HOME:;;19964 Fox;Redford;MI;48240;USA LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:19964 Fox=3D0D=3D0ARedford, MI = 48240=3D0D=3D0AUSA URL:http://www.mustangii.net URL:http://www.iocenter.net EMAIL;PREF;INTERNET:tgrahl@iocenter.net REV:20000329T172524Z END:VCARD ------=_NextPart_000_0171_01BF9979.DBDEAF80-- ------------------------------ Date: Wed, 29 Mar 2000 11:31:25 -0600 From: "CIRCLE" Subject: fiber hoods anybody? hey guess i figured it out never mind i am getting fiberglass hoods made in the near future and would like to know how many people would be interested in one and what kind of scoop the price quote i have gotten is around $400 thank donnie ---------------------------------------------- Original Message _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com ------------------------------ Date: Wed, 29 Mar 2000 12:47:46 EST From: "J Smooth" Subject: Re: fiber hoods anybody? Will you be painting these hoods as well or will it be sent in base color? I might be interested in the summer... ----Original Message Follows---- From: CIRCLE Reply-To: mustangii@topica.com To: mustangii@topica.com Subject: fiber hoods anybody? Date: Wed, 29 Mar 2000 09:26:27 -0800 hey guess i figured it out never mind i am getting fiberglass hoods made in the near future and would like to know how many people would be interested in one and what kind of scoop the price quote i have gotten is around $400 thank donnie ---------------------------------------------- Original Message _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com ________________________________________________________________________ Start an Email List For Free at Topica. http://www.topica.com/register ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com ------------------------------ Date: Wed, 29 Mar 2000 11:57:38 -0600 From: Edward Budy Subject: RE: fiber hoods anybody? This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01BF99A8.48172FA0 Content-Type: text/plain; charset="ISO-8859-1" I may be interested if its a cowl Air induction type 2-3 inches in height similar to the Z-28 stile. Ed -----Original Message----- From: J Smooth [mailto:shaft_m@hotmail.com] Sent: Wednesday, March 29, 2000 11:48 AM To: mustangii@topica.com Subject: Re: fiber hoods anybody? Will you be painting these hoods as well or will it be sent in base color? I might be interested in the summer... ----Original Message Follows---- From: CIRCLE Reply-To: mustangii@topica.com To: mustangii@topica.com Subject: fiber hoods anybody? Date: Wed, 29 Mar 2000 09:26:27 -0800 hey guess i figured it out never mind i am getting fiberglass hoods made in the near future and would like to know how many people would be interested in one and what kind of scoop the price quote i have gotten is around $400 thank donnie ---------------------------------------------- Original Message _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com ________________________________________________________________________ Start an Email List For Free at Topica. http://www.topica.com/register ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------_=_NextPart_001_01BF99A8.48172FA0 Content-Type: text/html; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable I may be interested if its a cowl Air induction type = 2-3 inches in height similar to the Z-28 stile. Ed -----Original Message----- From: J Smooth [mailto:shaft_m@hotmail.com] Sent: Wednesday, March 29, 2000 11:48 AM To: mustangii@topica.com Subject: Re: fiber hoods anybody? Will you be painting these hoods as well or will it = be sent in base color? I might be interested in the summer... ----Original Message Follows---- From: CIRCLE = Reply-To: mustangii@topica.com To: mustangii@topica.com Subject: fiber hoods anybody? Date: Wed, 29 Mar 2000 09:26:27 -0800 hey guess i figured it out never mind i am getting fiberglass hoods made in the near = future and would like to know how many people would be interested in one and = what kind of scoop the price quote i have gotten is around $400 thank donnie ---------------------------------------------- Original Message _____________________________________________ Free email with personality! Over 200 = domains! http://www.MyOwnEmail.com _______________________________________________________________= _________ Start an Email List For Free at Topica. http://www.topica.com/register ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com _________________________________________________________ Enlighten your = in-box. http://www.topica.com/t/15 ------_=_NextPart_001_01BF99A8.48172FA0-- ------------------------------ Date: Wed, 29 Mar 2000 14:10:43 -0700 From: Dale Billips Subject: Re: Parted out I need the chamois color. Thanks Dale "Timothy M. Grahl" wrote: > > Which color? The chamois or black? Neither has the plastic pins but those > can be ordered somewhere. > > Tim > > -----Original Message----- > From: Dale Billips > To: mustangii@topica.com > Date: Monday, March 27, 2000 9:56 AM > Subject: Re: Parted out > > If you have a drivers side sun visor and a console that is in good > shape, let me know. I might be interested if the price is right. > > Dale Billips > > > "Timothy M. Grahl" wrote: > > > > I have stripped the 77 Ghia due to the extensive rust on the body > > panels. The engine and trans has been put into a 65 Mustang. The > > interior is Chamois Vinyl and is in great shape. Email me if you need > > any chamois interior parts. > > > > Also, I have run across a 77 Cobra II, black on black. No engine, no > > trans, no floor and extensive rust. I will be stripping the interior > > and some exterior parts in the next couple of weeks. Some of the > > interior is spoken for but email me with want lists. > > > > > > Timothy M. Grahl > _________________________________________________________ > Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Wed, 29 Mar 2000 17:59:07 -0600 (CST) From: Fordman66@webtv.net (Ford Mann) Subject: Grille I was cleaning out my garage today and I found a Grille insert with clear parking light assemblies. I was wondering if anybody would be interested in this grille? What are they worth? Thanks. Ted. ------------------------------ Date: Wed, 29 Mar 2000 21:47:44 -0500 From: Tim Grahl Subject: RE: Parted out ------ =_NextPart_000_01BF99C9.8D62C580 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I have both parts you are looking for. I am not sure what they are = going for so make me an offer. I am not in this for the money, just = want to make use of the parts. The console is a little worn but not = torn or dented or broken. Like I mentioned before, the visors do not = have the pins but I hear they are easy enough to find. If you don't = like them, you can return them for a full refund. I would just hate to = see the parts go to the dumpster. Tim ---------- From: Dale Billips[SMTP:billips@amigo.net] Sent: Wednesday, March 29, 2000 5:09 PM To: mustangii@topica.com Subject: Re: Parted out I need the chamois color. Thanks Dale "Timothy M. Grahl" wrote: >=20 > Which color? The chamois or black? Neither has the plastic pins but = those > can be ordered somewhere. >=20 > Tim >=20 > -----Original Message----- > From: Dale Billips > To: mustangii@topica.com > Date: Monday, March 27, 2000 9:56 AM > Subject: Re: Parted out >=20 > If you have a drivers side sun visor and a console that is in good > shape, let me know. I might be interested if the price is right. >=20 > Dale Billips >=20 > > "Timothy M. Grahl" wrote: > > > > I have stripped the 77 Ghia due to the extensive rust on the body > > panels. The engine and trans has been put into a 65 Mustang. The > > interior is Chamois Vinyl and is in great shape. Email me if you = need > > any chamois interior parts. > > > > Also, I have run across a 77 Cobra II, black on black. No engine, = no > > trans, no floor and extensive rust. I will be stripping the = interior > > and some exterior parts in the next couple of weeks. Some of the > > interior is spoken for but email me with want lists. > > > > > > Timothy M. Grahl > _________________________________________________________ > Enlighten your in-box. http://www.topica.com/t/15 _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------ =_NextPart_000_01BF99C9.8D62C580 Content-Type: application/ms-tnef Content-Transfer-Encoding: base64 eJ8+IjQCAQaQCAAEAAAAAAABAAEAAQeQBgAIAAAA5AQAAAAAAADoAAEIgAcAGAAAAElQTS5NaWNy b3NvZnQgTWFpbC5Ob3RlADEIAQ2ABAACAAAAAgACAAEEkAYAIAEAAAEAAAAMAAAAAwAAMAIAAAAL AA8OAAAAAAIB/w8BAAAARwAAAAAAAACBKx+kvqMQGZ1uAN0BD1QCAAAAAG11c3RhbmdpaUB0b3Bp Y2EuY29tAFNNVFAAbXVzdGFuZ2lpQHRvcGljYS5jb20AAB4AAjABAAAABQAAAFNNVFAAAAAAHgAD MAEAAAAVAAAAbXVzdGFuZ2lpQHRvcGljYS5jb20AAAAAAwAVDAEAAAADAP4PBgAAAB4AATABAAAA FwAAACdtdXN0YW5naWlAdG9waWNhLmNvbScAAAIBCzABAAAAGgAAAFNNVFA6TVVTVEFOR0lJQFRP UElDQS5DT00AAAADAAA5AAAAAAsAQDoBAAAAAgH2DwEAAAAEAAAAAAAAAp01AQSAAQAPAAAAUkU6 IFBhcnRlZCBvdXQAyQQBBYADAA4AAADQBwMAHQAVAC8ALAADAGoBASCAAwAOAAAA0AcDAB0AFQAt ABEAAwBNAQEJgAEAIQAAAENCODY5M0M2QkEwNUQ0MTFBNUY0NDQ0NTUzNTQwMDAwAOwGAQOQBgBQ BwAAFAAAAAsAIwAAAAAAAwAmAAAAAAALACkAAAAAAAMALgAAAAAAAwA2AAAAAABAADkAoBcMU/KZ vwEeAHAAAQAAAA8AAABSRTogUGFydGVkIG91dAAAAgFxAAEAAAAWAAAAAb+Z8lMExpOGzAW6EdSl 9ERFU1QAAAAAHgAeDAEAAAAFAAAAU01UUAAAAAAeAB8MAQAAABQAAAB0Z3JhaGxAaW9jZW50ZXIu bmV0AAMABhD50o2RAwAHEFcFAAAeAAgQAQAAAGUAAABJSEFWRUJPVEhQQVJUU1lPVUFSRUxPT0tJ TkdGT1JJQU1OT1RTVVJFV0hBVFRIRVlBUkVHT0lOR0ZPUlNPTUFLRU1FQU5PRkZFUklBTU5PVElO VEhJU0ZPUlRIRU1PTkVZLEpVAAAAAAIBCRABAAAAzQUAAMkFAAC2CwAATFpGdTy7Ktr/AAoBDwIV AqQD5AXrAoMAUBMDVAIAY2gKwHNldG4yBgAGwwKDMgPFAgBwhHJxEiJzdGVtAoOuMwPGBxMCgzQU rX0KgIsIzwnZOxefMjU1AoAHCoENsQtgbmcxMDMvFJALChSSDAFjAEAgSSIgEcB2ZSAG4HRoqiAK sXQEIHkIYCAKwJMc0Bcwb2sLgGcgAhAIci4gHHFhbSBu2R0AIHMIcBzQdxHABUDJHRBleR3TZ28e ZR+A9G8gAMBrHNAHgB3QA6D+bw3QBJAe0R74C4AgIQQAHyETIDEhgAIgIFAsIGr+dRQAH9AAcCAR IXUk4BzQ7yJAJBMdQyKSVCQxBaAAgNcG8BzQI7FhHhBpAkAnweZ3BbADoGJ1BUAfUiVwvwShBbEN sAIwCYApwmIDYOUhsG4e0UxpIbEcgAeAbQIwaSRxKlBiDcAFsGW7JLAkInYEAAWwBCBkIXB/H1Ic oyZjC4AEICkCHIFldwrBIDcvMHMgYAnwCGBn6x0gJXFmC4BkHtImQB2ieS1wbicFQChAIbEgMW3b JLAdomMDkRegdAhwI3LHFCAhEyggZnVsAyAXoP80gDEUKKE0kCpQJNMf8S4RfyFwEfAuFR1TIMAl YiQiZPh1bXAUAR7ACoUKhQdhRzjMCosoQDE4MALRafAtMTQ0DfAM0DwjC1lcMTYKoANgFBBjBUAt Xz5HCoc8+wwwPcZGA2E6Zz9OPcYMgiBEB0Ac0EIHAxAoQDhgW1NNVFBUOmJDZEAfIGkgwC75JIB0 XT7vP/0GYAIwQS+NQjtXCYAkgHNkYSShxk0KwBGwIDI5JLAB0AE7wCA1OjA5IFBmTUVPP/1Ub0eP Qjtt4yThGpFpaUAlcC5wMyAeLgWgOcZL70bHdWJqpz4BTZ9CO1JlUyBQHVHPKkIpEDpPO1MzNjzH FcL/DAE9xhyAJIAqQSQiEbEEYJ8jsRcTOLYnMABwa3MKhbtDAjjMIgdhHQEgYE0e0MBHcmFobCIf 0D3S2joKhT45Jl7QVyOgSkE9FxM/JxVZpSpyC2Bja/9gMQexKFAgQAXAEcAEICZj3wtgFABQQC5o HRBvEfBeZ/8zIixAKcEEgSpBIWAHgB/gv2VxOLZe2TmoXtk+Q08FEB1P0G4HQAXQB5BzYWeeZT6a XtBA5EMKIDxEL/4+ZvhNgU9/UIFsIG4/UIG/bVhDAF4xBdACIEnKN0qV8Dk6NTYVEEtmXtBSt99V D16dMWUcoyggZAUQHMD/LUEAkA2wH4EDoC0DIgEqUP8oICd2HRAgASOxI2EgwARw9XW3cxHAcCyR J8AFQCHh2msfUHce00SxaAVAZRF/C4A4gQeQKjIGkCZUBRBj/yfTaTF9IGZfcVJDKH+fXsH/XN9d 721YdrEclBQABRF7sPlZNDc3g2AjoHeRClA3ttxleBQQAIEcwXIk4gIgcyQTBuBkeYIJCrAkgGz/ JucJ8GlRIfJZMYOABjFiYn8sQAnwHTApEX2BIXAoIDb+NQXQb6Qe0Scxggl9gyvgqwXAI7FDWaVW C4B5AyC/eSJ6VRegIAF7gx7RRQDA/wMRIeF+MR2iWQKCCQBwIGBfWZaPNyakhE+CckGKkG//JLAc hYigA6AA0ANgBBEoIM+G0QhQKqAoIElJJLBhU/eI4mFTHtFOIXCLNCSwH1D/ggmL45tSHpAeIXkE iAw1NP9DYWUChgQeYiQijzaTm2Wkf4fzlUgjVBzQJICIECdhdbsLUCYTdwngWyAiklOhkucmNI6P j5RzcCrCIRMpAv8UIJJ1A/AdESUjKEAUAJXf94Segs6Bd1+s363vrv+vU/mBd0VuKEB9EYyhHaGP ofRuLQbgeCKSslRXfRxBfwxgF4A9xTtwWxAqUH0gdKBwOi8vd7WALlAY4C90LzE1V3895AqF/69f uZ+6r7ALsP+yD7MftC//tT+2T7dfOh9WXzzHG9W3rQUWwQDIUAAAAAMAEBAAAAAAAwAREAAAAABA AAcwIOF5+/GZvwFAAAgwIOF5+/GZvwEeAD0AAQAAAAUAAABSRTogAAAAAAMADTT9NwAAbFE= ------ =_NextPart_000_01BF99C9.8D62C580-- ------------------------------ Date: Thu, 30 Mar 2000 00:20:21 -0500 From: "Tim and Pam Allgire" Subject: Re: help did it right--came thru on my end. -----Original Message----- From: CIRCLE To: mustangii@topica.com Date: Wednesday, March 29, 2000 12:25 PM Subject: help >im new here and am wondering how to post messages to the whole mustang II >crew here i think this is only going to one person if so could you please >tell me how it is done i am just another mustang II enthusiast looking to >buy sell trade and talk with other stang II enthusiasts >please help > >Donnie >---------------------------------------------- > > >_____________________________________________ >Free email with personality! Over 200 domains! >http://www.MyOwnEmail.com > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 > ------------------------------ End of mustangii@topica.com digest, issue 83 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top Message: 4 of 29 From: mustangii@topica.com Save Address -------------------------------------------------------------------------------- To: mustangii@topica.com Subject: Digest for mustangii@topica.com, issue 84 Date: Fri, 31 Mar 2000 03:32:13 -0800 -------------------------------------------------------------------------------- -- Topica Digest -- Re: parts By jgering@apci.net RE: parts By jeremyc@i-link.net Re: fiber hoods anybody? By circlejerk@nirvanafan.com RE: fiber hoods anybody? By circlejerk@nirvanafan.com RE: fiber hoods anybody? By jeremyc@i-link.net RE: fiber hoods anybody? By circlejerk@nirvanafan.com RE: fiber hoods anybody? By Fordman66@webtv.net Fwd: Hi .. love ya!! By atgreen1@yahoo.com Re: fiber hoods anybody? By zstlkr@aol.com Re: fiber hoods anybody? By zstlkr@aol.com ------------------------------------------------------------ Date: Thu, 30 Mar 2000 08:25:30 -0600 From: "Jeff Gering" Subject: Re: parts yes they go on the back quarter panel in the front of the wheel well I just decided not to go with the king cobra look they are brand new and never used let me know if you still want them and when I can send them c.o.d ------------------------------ Date: Thu, 30 Mar 2000 07:35:27 -0700 From: Jeremy Carlson Subject: RE: parts I'm sorry.. I've sent out a lot of emails on mustang parts... I'm trying to help my girlfriend fix her cobra up... which parts was this about? -----Original Message----- From: Jeff Gering [mailto:jgering@apci.net] Sent: Thursday, March 30, 2000 7:23 AM To: mustangii@topica.com Subject: Re: parts yes they go on the back quarter panel in the front of the wheel well I just decided not to go with the king cobra look they are brand new and never used let me know if you still want them and when I can send them c.o.d _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Thu, 30 Mar 2000 11:1:27 -0600 From: "CIRCLE" Subject: Re: fiber hoods anybody? they will be base color thogh I can probably paint them for an extra cost Donnie ---------------------------------------------- Original Message From: "J Smooth" Subject: Re: fiber hoods anybody? Date: Wed, 29 Mar 2000 09:48:14 -0800 >Will you be painting these hoods as well or will it be sent in base color? >I might be interested in the summer... > >----Original Message Follows---- >From: CIRCLE >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: fiber hoods anybody? >Date: Wed, 29 Mar 2000 09:26:27 -0800 > >hey guess i figured it out never mind >i am getting fiberglass hoods made in the near future and would like to >know how many people would be interested in one and what kind of scoop >the price quote i have gotten is around $400 >thank >donnie >---------------------------------------------- >Original Message > > >_____________________________________________ >Free email with personality! Over 200 domains! >http://www.MyOwnEmail.com > >________________________________________________________________________ >Start an Email List For Free at Topica. http://www.topica.com/register > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 > _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com ------------------------------ Date: Thu, 30 Mar 2000 11:6:0 -0600 From: "CIRCLE" Subject: RE: fiber hoods anybody? thats about what i was thinking. though more along the lines of an exagerated 95-98 stang style hood more rounded to soot the contours of the car. this way it would look like it was supposed to be there i wouldnt make the cowl more than 2-3 inches high either Donnie ---------------------------------------------- Original Message From: "Edward Budy" Subject: RE: fiber hoods anybody? Date: Wed, 29 Mar 2000 09:57:49 -0800 >I may be interested if its a cowl Air induction type 2-3 inches in height >similar to the Z-28 stile. > >Ed > > >-----Original Message----- >From: J Smooth [mailto:shaft_m@hotmail.com] >Sent: Wednesday, March 29, 2000 11:48 AM >To: mustangii@topica.com >Subject: Re: fiber hoods anybody? > > >Will you be painting these hoods as well or will it be sent in base color? >I might be interested in the summer... > >----Original Message Follows---- >From: CIRCLE >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: fiber hoods anybody? >Date: Wed, 29 Mar 2000 09:26:27 -0800 > >hey guess i figured it out never mind >i am getting fiberglass hoods made in the near future and would like to >know how many people would be interested in one and what kind of scoop >the price quote i have gotten is around $400 >thank >donnie >---------------------------------------------- >Original Message > > >_____________________________________________ >Free email with personality! Over 200 domains! >http://www.MyOwnEmail.com > >________________________________________________________________________ >Start an Email List For Free at Topica. http://www.topica.com/register > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com ------------------------------ Date: Thu, 30 Mar 2000 10:04:04 -0700 From: Jeremy Carlson Subject: RE: fiber hoods anybody? I think it would look better like the newer 2000 'stang. if you go with a scoop, you've gotta keep it in a 'stang style -----Original Message----- From: CIRCLE [mailto:circlejerk@nirvanafan.com] Sent: Thursday, March 30, 2000 10:01 AM To: mustangii@topica.com Subject: RE: fiber hoods anybody? thats about what i was thinking. though more along the lines of an exagerated 95-98 stang style hood more rounded to soot the contours of the car. this way it would look like it was supposed to be there i wouldnt make the cowl more than 2-3 inches high either Donnie ---------------------------------------------- Original Message From: "Edward Budy" Subject: RE: fiber hoods anybody? Date: Wed, 29 Mar 2000 09:57:49 -0800 >I may be interested if its a cowl Air induction type 2-3 inches in height >similar to the Z-28 stile. > >Ed > > >-----Original Message----- >From: J Smooth [mailto:shaft_m@hotmail.com] >Sent: Wednesday, March 29, 2000 11:48 AM >To: mustangii@topica.com >Subject: Re: fiber hoods anybody? > > >Will you be painting these hoods as well or will it be sent in base color? >I might be interested in the summer... > >----Original Message Follows---- >From: CIRCLE >Reply-To: mustangii@topica.com >To: mustangii@topica.com >Subject: fiber hoods anybody? >Date: Wed, 29 Mar 2000 09:26:27 -0800 > >hey guess i figured it out never mind >i am getting fiberglass hoods made in the near future and would like to >know how many people would be interested in one and what kind of scoop >the price quote i have gotten is around $400 >thank >donnie >---------------------------------------------- >Original Message > > >_____________________________________________ >Free email with personality! Over 200 domains! >http://www.MyOwnEmail.com > >________________________________________________________________________ >Start an Email List For Free at Topica. http://www.topica.com/register > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15 ------------------------------ Date: Thu, 30 Mar 2000 11:15:44 -0600 From: "CIRCLE" Subject: RE: fiber hoods anybody? good call jeremy how about the cowl with some kind of inverted scoop on the front Donnie ---------------------------------------------- Original Message From: "Jeremy Carlson" Subject: RE: fiber hoods anybody? Date: Thu, 30 Mar 2000 09:04:08 -0800 >I think it would look better like the newer 2000 'stang. if you go with a >scoop, you've gotta keep it in a 'stang style > >-----Original Message----- >From: CIRCLE [mailto:circlejerk@nirvanafan.com] >Sent: Thursday, March 30, 2000 10:01 AM >To: mustangii@topica.com >Subject: RE: fiber hoods anybody? > > >thats about what i was thinking. though more along the lines of an >exagerated 95-98 stang style hood more rounded to soot the contours of the >car. this way it would look like it was supposed to be there i wouldnt >make the cowl more than 2-3 inches high either >Donnie >---------------------------------------------- >Original Message >From: "Edward Budy" >Subject: RE: fiber hoods anybody? >Date: Wed, 29 Mar 2000 09:57:49 -0800 > >>I may be interested if its a cowl Air induction type 2-3 inches in height >>similar to the Z-28 stile. >> >>Ed >> >> >>-----Original Message----- >>From: J Smooth [mailto:shaft_m@hotmail.com] >>Sent: Wednesday, March 29, 2000 11:48 AM >>To: mustangii@topica.com >>Subject: Re: fiber hoods anybody? >> >> >>Will you be painting these hoods as well or will it be sent in base color? > >>I might be interested in the summer... >> >>----Original Message Follows---- >>From: CIRCLE >>Reply-To: mustangii@topica.com >>To: mustangii@topica.com >>Subject: fiber hoods anybody? >>Date: Wed, 29 Mar 2000 09:26:27 -0800 >> >>hey guess i figured it out never mind >>i am getting fiberglass hoods made in the near future and would like to >>know how many people would be interested in one and what kind of scoop >>the price quote i have gotten is around $400 >>thank >>donnie >>---------------------------------------------- >>Original Message >> >> >>_____________________________________________ >>Free email with personality! Over 200 domains! >>http://www.MyOwnEmail.com >> >>________________________________________________________________________ >>Start an Email List For Free at Topica. http://www.topica.com/register >> >>______________________________________________________ >>Get Your Private, Free Email at http://www.hotmail.com >> >>_________________________________________________________ >>Enlighten your in-box. http://www.topica.com/t/15 > >_____________________________________________ >Free email with personality! Over 200 domains! >http://www.MyOwnEmail.com > >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 > _____________________________________________ Free email with personality! Over 200 domains! http://www.MyOwnEmail.com ------------------------------ Date: Thu, 30 Mar 2000 11:24:18 -0600 (CST) From: Fordman66@webtv.net (Ford Mann) Subject: RE: fiber hoods anybody? If your going to go with a hood scoop, go with a hood SCOOP like a 69-70 Boss 429 scoop. That way you get noticed. Ted. ------------------------------ Date: Thu, 30 Mar 2000 18:44:56 -0800 (PST) From: keith labeau Subject: Fwd: Hi .. love ya!! --0-1804289383-954470696=:6223 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Note: forwarded message attached. __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com --0-1804289383-954470696=:6223 Content-Type: message/rfc822 X-Apparently-To: atgreen1@yahoo.com via web1607.mail.yahoo.com X-Track2: 2 X-Track: -50 Received: from web214.mail.yahoo.com (128.11.68.114) by mta126.mail.yahoo.com with SMTP; 30 Mar 2000 14:07:37 -0000 Received: (qmail 29636 invoked by uid 60001); 30 Mar 2000 14:07:36 -0000 Message-ID: <20000330140736.29635.qmail@web214.mail.yahoo.com> Received: from [210.80.44.2] by web214.mail.yahoo.com; Thu, 30 Mar 2000 06:07:36 PST Date: Thu, 30 Mar 2000 06:07:36 -0800 (PST) From: Neena Bagus Subject: Hi .. love ya!! To: Dawn , Keith MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Length: 1895 Why do Women Cry? "Why are you crying?" he asked his Mom. "Because I'm a woman" she told him. "I don't understand," he said. His Mom just hugged him and said, "And you never will".......... Later the little boy asked his father, "Why does mother seem to cry for no reason?" "All women cry for no reason" was all his dad could say........ The little boy grew up and became a man, still wondering why women cry. Finally he put in a call to GOD; when GOD got on the phone, the man said, "GOD, why do women cry so easily?" GOD said....... When I made women she had to be special. I made her shoulders strong enough to carry the weight of the world; yet, gentle enough to give comfort. I gave her an inner strength to endure childbirth and the rejection that many times comes from her children. I gave her a hardness that allows her to keep going when everyone else gives up and take care of her family through sickness and fatigue without complaining. I gave her the sensitivity to love her children under any and all circumstances, even when her child has hurt them very badly. This same sensitivity helps her to make a child's boo-boo feel better and shares in their teenagers anxieties and fears. I gave her strength to carry her husband through his faults and fashioned her from his rib to protect his heart. I gave her wisdom to know that a good husband never hurts his wife, but sometimes tests her strengths and her resolve to stand beside him unfalteringly. I gave her a tear to shed. It's hers exclusively to use whenever it is needed. It's her only weakness. It's a tear for mankind. ----------------- Please send this to women you know, and those with mothers, and sisters, and special women in their lives..... and GOD bless! __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com --0-1804289383-954470696=:6223-- ------------------------------ Date: Thu, 30 Mar 2000 23:52:31 EST From: ZSTLKR@aol.com Subject: Re: fiber hoods anybody? hey donnie i got a guy in md thats makein me a cowl induction hood for 375.00 plus shipping mine will be here in about 2 weeks plus shipping chuck ------------------------------ Date: Thu, 30 Mar 2000 23:54:09 EST From: ZSTLKR@aol.com Subject: Re: fiber hoods anybody? if ne one else is intrested in glass hoodsfor a II just e-mail me chuck ------------------------------ End of mustangii@topica.com digest, issue 84 -------------------------------------------------------------------------------- ply | Reply All | Forward | Delete | Move To keep Main Back to Top